Shop
Showing 76–100 of 2138 results
- UNI-T Digital Oscilloscope
100MHz Oscilloscope Scope Clip Probes P6000 in Pakistan
(Advance Payment Only)
(Delivery Via Cargo Service)
100MHz Oscilloscope Scope Clip Probes P6000 is used to connect the scope to your electrical circuit. 100MHz Oscilloscope Scope Clip Probes P600, the BNC connector is attached by pressing it into the connector on the scope and turning. The alligator clip is your ground connection and must always be connected to your circuit’s ground. The witch hat goes on the end of the probe and allows you to easily connect to things by simply pressing it down. Do not remove the witch hat. The vertical scale or voltage is controlled with these two knobs. The position knob will adjust where the signal is in the vertical direction. The scale knob adjusts how many volts each vertical block represents. The buttons on the left are for selecting which channel you are editing.
SKU: D817 - Through Hole Capacitor
100UF 25V Aluminium Electrolytic Polar Capacitor In Pakistan
This Through Hole Mount (DIP) Multilayer Ceramic Capacitor is made of ceramic dielectric in which a number of interleaved metal electrodes are contained. It is very low cost and used mostly for reducing the noise or filtering on data lines, power lines, etc.
SKU: D1834 - Industrial Products
100w hot melt glue gun sd-a in Pakistan
Powerful Hot Glue Gun with High – Tech Electronic PTC heating technology, Rapid-safety- only preheating 3-5 Minutes! Smart Temperature Control Keeps it at a Consistent Reliable Temperature. High-quality copper nozzle with high temperature protecting- cover,wear-resistant and leak-proof glue escaping; Trigger propulsion device built-in slip ring to prevent the plastic rod back and controls glue flow will help you save more glue sticks and solve the trouble of the glue Backflow and Leak- glue
SKU: D2425 - Through Hole Capacitor
104pF Capacitor 100nF Capacitor 0.1uF Capacitor In Pakistan
This is a 0.1uF – (104) Ceramic Capacitor Use this capacitor for power decoupling, having a smooth power in your circuit, timing circuits, etc. It is always a good idea to put one of these next to the power pins of a microcontroller.
SKU: n/a - Drill Machine & Accessories
105 Pcs Rotary Tool Accessories Kit For Mini Drill Machine In Pakistan
Quick View
Drill Machine & Accessories105 Pcs Rotary Tool Accessories Kit For Mini Drill Machine In Pakistan
105p Rotary Tool Accessories Kit For Mini Drill Machine Use Polishing, Sanding, And Grinding.105pcs Rotary Accessory Complete Kit includes polishing tools, pads, cutting, drums, grinding, sanding, carving bits and cleaning parts, etc. with small, good polishing effect, high efficiency. Uses: It suits your polishing needs, it can be used for metallic and non-metallic materials. suitable for cleaning metal surfaces, grinding, dusting, deburring, polishing, peeling debris.
SKU: 270,B41 - Jumper Wires
10Cm Hole to Hole DuPont Line 40pcs Jumper Wire Cable In Pakistan
This is 10CM Female to Female Breadboard Jumper Dupont 2.54MM 1P-1P Cable 40 Pcs. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
SKU: D223,B110 - Jumper Wires
10Cm Pin to Hole DuPont Line 40pcs Jumper Wire Cable In Pakistan
10Cm Pin To Hole Jumper Wire Dupont Line 40 Pin Male To Female Arduino Jumper Wires also named as male to female jumper wire is very useful while prototyping electronics circuits. A jump wire (also known as jumper, jumper wire, jumper cable, DuPont wire, or DuPont cable – named for one manufacturer of them) is an electrical wire or group of them in a cable with a connector or pin at each end (or sometimes without them – simply “tinned”), which is normally used to interconnect the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual jump wires are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment.
SKU: D224,B110 - Jumper Wires
10Cm Pin to Pin DuPont Line 40pcs Jumper Wire Cable In Pakistan
This is 10CM Male To Male Breadboard Jumper Dupont 2.54MM 1P-1P Cable 40 Pcs. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin male to the 1pin male header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
SKU: D222,B110 - Through Hole Resistor
10K Ohm 1/4 Watt 5% Carbon Film Resistor Through Hole In Pakistan (12 Pcs)
Quick ViewThrough Hole Resistor10K Ohm 1/4 Watt 5% Carbon Film Resistor Through Hole In Pakistan (12 Pcs)
This is a 10K Ohm 0.25W 5% Carbon Film Resistor Axial Through-Hole pack of 12 pieces. These carbon film axial through-hole resistors have an operating range of -55C To +155C with a rated power of 0.25 Watts or 1/4 Watts. The maximum working voltage is 300 Volts and the maximum overload voltage is 600 Volts for these resistors.
SKU: D1012,SB181 - Potentiometer
10K Ohm 3296W Multiturn Trimmer Potentiometer Variable Resistor In Pakistan
3296 series Multiturn trim pot. Multiturn potentiometers are used in applications where accuracy and precision are important. As the name suggests the need to turn the know several times for going through the full scale of 0K ohm to the maximum. 3296 series variable Multi-turn Potentiometers also called as Trim-Pot or Preset. Normal potentiometers cover the complete range of resistance in one turn whereas a multi-turn potentiometer covers the same range in multiple turns thereby giving the user the option to provide a more accurate setting/adjustment. This 3296 series PCB Mounting multi-turn variable potentiometer can also be easily mounted on a breadboard.
SKU: D1179 - Potentiometer
10K Ohm Rotary Potentiometer Variable Resistor Volume Type In Pakistan
Volume Type Variable Resistor Rotary Potentiometer is the most significant component. Volume Type Variable Resistor Rotary Potentiometer is found in many electrical devices for controlling the tone, bass as well as volume. This is due to the fact that resistors can be connected together with the other components to form filters for the desired level.
SKU: D1090,SB107 - Potentiometer
10k Rm065 Variable Resistor In Pakistan
Cermet preset is a compact variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated. The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.
SKU: D2654 - Mic Module
10MM MIC Capsule Electret Condenser Microphone in Pakistan
The, condenser microphone, is a device which converts from sound energy into electrical energy. It’s working as a parallel plate capacitor and works on the principle of a variable capacitance. It consists of two plates, one fixed (called the back plate) and the other moveable (called Diaphragm) with a small gap between them. An electric potential charges the plate. When sound strikes the diaphragm it starts moving, thereby changing the capacitance between the plates which in turn results in a variable electric current to flow.SKU: D2662 - Battery Management System (BMS) Modules
10S 36V 30A Li-ion Protection Board Li-ion Cell 18650 Battery Protection BMS in Pakistan
Quick ViewBattery Management System (BMS) Modules10S 36V 30A Li-ion Protection Board Li-ion Cell 18650 Battery Protection BMS in Pakistan
Has a balance function that would ensure each cell is fully charged at the same time.Overcharge protection, over-discharge protection, and short circuit protection.
With temperature control protection function. Fine workmanship and good performance. Safe and reliable. Easy to use. Long service life. Suitable for 10 series cell Li-ion batteries, can be used for 3.7V ternary batteries, manganese acid batteries, and cobalt acid batteries. Suitable for electric cars, electric assistant cars, skateboard cars, inverters, etc.SKU: D2313 - Through Hole Capacitor
10UF 400V Aluminum Electrolytic Polar Capacitor In Pakistan
An aluminum electrolytic capacitor, often only called an electrolytic capacitor, uses aluminum metal as one electrode, covered with a very thin layer of aluminum oxide as dielectric, and which has an
the electrolyte as its second electrode.SKU: D2542 - Through Hole Capacitor
10UF 50V Aluminum Electrolytic Polar Capacitor In Pakistan
Aluminum 10uF 50V Electrolytic Capacitor is polarized components due to asymmetrical construction, 10uF 50V Electrolytic Capacitor must be operated with a higher voltage (ie, more positive) on the anode than on the cathode at all times. For this reason, the anode terminal is marked with a plus sign and the cathode with a minus sign. Applying a reverse polarity voltage, or a voltage exceeding the maximum rated working voltage of as little as 1 or 1.5 volts, can destroy the dielectric and thus the capacitor. The failure of electrolytic capacitors can be hazardous, resulting in an explosion or fire. Bipolar electrolytic capacitors which may be operated with either polarity are also made, using special constructions with two anodes connected in series.
SKU: D2529
