100MHz Oscilloscope Scope Clip Probes P6000 in Pakistan
(Advance Payment Only)
(Delivery Via Cargo Service)
100MHz Oscilloscope Scope Clip Probes P6000 is used to connect the scope to your electrical circuit. 100MHz Oscilloscope Scope Clip Probes P600, the BNC connector is attached by pressing it into the connector on the scope and turning. The alligator clip is your ground connection and must always be connected to your circuit’s ground. The witch hat goes on the end of the probe and allows you to easily connect to things by simply pressing it down. Do not remove the witch hat. The vertical scale or voltage is controlled with these two knobs. The position knob will adjust where the signal is in the vertical direction. The scale knob adjusts how many volts each vertical block represents. The buttons on the left are for selecting which channel you are editing.
₨1,050
100MHz Oscilloscope Scope Clip Probes P6000 is used to connect the scope to your electrical circuit. 100MHz Oscilloscope Scope Clip Probes P600, the BNC connector is attached by pressing it into the connector on the scope and turning. The alligator clip is your ground connection and must always be connected to your circuit’s ground. The witch hat goes on the end of the probe and allows you to easily connect to things by simply pressing it down. Do not remove the witch hat. The vertical scale or voltage is controlled with these two knobs. The position knob will adjust where the signal is in the vertical direction. The scale knob adjusts how many volts each vertical block represents. The buttons on the left are for selecting which channel you are editing.
Features & Specifications of 100MHz Oscilloscope Scope Clip Probes P6000:
- P6000 For DC 100MHz x1 x10 600V
- 100% new high quality
- Type: p6100
- Bandwidth: a 100 MHz
- Increase time: 3.5ns
- Attenuation rates: 1X and 10X
- Type resitance: 1X: 1m ohm /- 2%,10 times: 10m ohm /- 2% of
- Input capacity: 1X : 70pf ~ 120pf 10 times: 13pf ~ 17pf
- Maximum input:1X: 200 operating voltage (VP – P)
- 10 times 600 working voltage (VP- P)
- The coverage: 10 ~ 35pf
- Environment: 0 ~ 50 C, 0 ~ 80% RH
- Storage environment: – 20 ~ 60 C, 0 ~ 90% RH
- Length: the 120 & plusmn, 2cm
- Weight:about 55g
Package Includes:
1 x 100MHz Oscilloscope Scope Clip Probes P6000
Related products
- UNI-T Digital Oscilloscope
UNI T 100MHz Passive Probe Oscilloscope UT P04 in Pakistan
This UNI-T 100MHz Oscilloscope UT P04 is a high-quality product. This UTP04 passive scope is brand new, has stable performance, and is not easy to break. UTP 04 Oscilloscope lead has passed the CE Attestation of the European Community. This oscilloscope cable is manufactured with high-quality electronic components. This oscilloscope for meter can be perfectly adapted to the corresponding type of oscilloscope.
SKU: D806 - UNI-T Digital Oscilloscope
Ultra Phosphor Oscilloscope 4 Channel DSO UNI T UPO3254E in Pakistan
Quick View
UNI-T Digital OscilloscopeUltra Phosphor Oscilloscope 4 Channel DSO UNI T UPO3254E in Pakistan
(Advance Payment Only)
(Delivery Via Cargo Service)
UNI-T UPO3254E ultra-phosphor oscilloscopes can realize functions of deep storage, high waveform capture rate, real-time waveform recording, and playback, multi-level intensity grading display, and more with UNI-T special 3D technology. Some competitive features of Digital Storage Oscilloscope are 250MHz bandwidth, up to 2.5GS/s real-time sampling rate, 2/4 channels, 70Mpts standard memory depth, and higher than 200,000wfms/s waveform capture rate, more than 100,000 waveforms continuous recording and analysis, up to 256 levels intensity grading display. Sampling DSO can be operated with a standard 25MHz dual-channel function/arbitrary waveform generator or an optional digital multimeter module (UT-M12). The Digital Storage CRO has multiple triggers and Bus decoding functions, including edge, pulse width, slope, video, runt, windows, Nth edge, delay, overtime, code, USB, RS232/UART, I2C, SPI, CAN, LIN, and FlexRay triggers, duration, setup/hold and more. UNI-T Scopemeter features low noise and 1mV/div Min vertical stall.
SKU: D803 - UNI-T Digital Oscilloscope
UNI T UTG2025A 25MHz USB Dual Channels Signal Function Arbitrary Waveform Generator In Pakistan
Quick ViewUNI-T Digital OscilloscopeUNI T UTG2025A 25MHz USB Dual Channels Signal Function Arbitrary Waveform Generator In Pakistan
UTG2025A Signal Generator has a 25MHz maximum output rate, 125 MS/s sampling rate, and 14-bit vertical resolution. Multifunctional Generator has an equivalent dual channel independent output, modulation, sweep frequency, Burst, and other complex waveform generation functions. With the convenient operation interface Digital Function Generator has excellent technical indicators, and humanized graphic display, this multi-purpose equipment can meet your learning and testing requirements and improve work efficiency. Oscilloscope Generator has many applications in Designing, testing, troubleshooting, and repairing electronic and electroacoustic devices, such as circuit and equipment testing in cellular and wireless systems, broadcasting, television, and radio systems; semiconductor component testing, etc.
SKU: D1286 - UNI-T Digital Oscilloscope
Digital Storage Oscilloscope 2 Channel DSO UNI T UTD2102CEX in Pakistan
Quick ViewUNI-T Digital OscilloscopeDigital Storage Oscilloscope 2 Channel DSO UNI T UTD2102CEX in Pakistan
(Advance Payment Only)
(Delivery Via Cargo Service)
A DSO Oscilloscope is a laboratory instrument commonly used to display and analyze the waveform of electronic signals. In effect, the device draws a graph of the instantaneous signal voltage as a function of time.UTD2102CEX Oscilloscope is a two-channel portable device with 7 inches 64k Color TFT LCD display 100MHz bandwidth and 1GS/s sampling rate. Digital Storage CRO is an ergonomic, lightweight, universal instrument designed for engineers. A sampling Oscilloscope is suitable for field testing and analyzing time-based voltage signals in a mobile environment.
SKU: D810 - UNI-T Digital Oscilloscope
UNI T 200MHz Oscilloscope Passive Probe UT P05 in Pakistan
UNI-T 200MHz oscilloscope probe UT-P05 is a device that makes a physical and electrical connection between a test point or signal source and an oscilloscope. This UTP05 passive probe lead is the most commonly used probes for taking general-purpose measurements. This best low price probe is constructed using wires, connectors, a housing, and, if required, compensation or attenuation resistors or capacitors.
SKU: D800
Reviews
There are no reviews yet