Programmers

This low-cost mini USB CH341A 24 25 Series EEPROM Flash BIOS USB Programmer is intended to support 24 EEPROM and 25 SPI flash 8pin/16 pin chips. It is equipped with a CH 341A chip, can automatically recognize 25 series chips, and its 24/25 series indicator lamp enables the user to easily recognize the module’s working status. This awesome programmer is also user-friendly because it supports USB to TTL conversion and the SOP8 SOP16 to DIP8 converter board makes the connection with different chips easily.CH341 is a USB bus convert chip, providing UART, printer port, parallel and synchronous serial with 2-wire or 4-wire through the USB bus. In UART mode, CH341 provides alternant rate control signals such as serial transfer enable, serial receive in ready, etc. It also supplies a common MODEM communication signal in order to expand UART for computers or upgrade common synchronous interface devices to USB buses directly. In printer port mode, CH341 supplies a standard USB printer port that compounds USB-relevant protocol and Windows operating system used to upgrade the ordinary parallel printers to USB buses directly. In parallel mode, CH341 gives out 8-bit parallel in EPP or MEM mode. It can be used to input/output data directly without MCU/DSP. Besides, CH341A also supports some common synchronous serial such as 2-wire (SCL, SDA) and 4-wire (CS, SCK/CLK, MISO/SDI/DIN, and MOSI/SDO/DOUT) interface.

This low-cost mini USB CH341A Programmer is intended to support 24 EEPROM and 25 SPI flash 8pin/16 pin chips. CH341A Programmer is equipped with a CH 341A chip, can automatically recognize 25 series chips, and its 24/25 series indicator lamp enables the user to easily recognize the module’s working status. This CH341A Programmer is awesome and user-friendly because it supports USB to TTL conversion and the SOP8 SOP16 to DIP8 converter board makes the connection with different chips easily.CH341 is a USB bus convert chip, providing UART, printer port, parallel and synchronous serial with 2-wire or 4-wire through the USB bus. In UART mode, CH341 provides alternant rate control signals such as serial transfer enable, serial receive in ready, etc. It also supplies a common MODEM communication signal in order to expand UART for a computer or upgrade the common synchronous interface device to a USB bus directly. In printer port mode, CH341 supplies a standard USB printer port that compounds USB-relevant protocol and Windows operating system used to upgrade the ordinary parallel printer to USB bus directly. In parallel mode, CH341 gives out 8-bit parallel in EPP or MEM mode. It can be used to input/output data directly without MCU/DSP. Besides, CH341A also supports some common synchronous serial such as 2-wire (SCL, SDA) and 4-wire (CS, SCK/CLK, MISO/SDI/DIN, and MOSI/SDO/DOUT) interface. Click on the picture to see suitable socked to program 25q32

K150 is a low-cost high-performance PIC programmer, supports the most popular PIC chips, is programmed, readout, encryption, uses high-speed USB communication, fast programming, the programming quality is stable and reliable. ( speed average PICSTART + 3-5 times ) fully automatic programming checksum; equipped with 40pin DIP programming Block, direct programming of 8pin-40pinDIP chip; 8pin-40 pin chip other than through the onboard the ICSP interface online download software; software-compatible the Windows98 and Windows2000/NT, Windows XP/windows7 operating system; the new device will vary with the PIC escalating. Master chip retains the DIP package with seat! (Note: Some manufacturers of similar programmer master chip SMD parts, caused no small trouble to future upgrades can not even upgrade Our products provide lifetime upgrades service)

This is Universal Programmer RT809H for NOR NAND EMMC EC MCU ISP programmer. RT809H Universal Programmer is for eMMC CAR DVD SMART TV BIOS programming. RR809H Supports FullLCD TV FLASH drivers reading and write unlimited capacity TSOP48 NAND FLASH EMMC TSOP56 pin TOP8-16 pin Support CAR DVD, SMART TV.

Universal Programmer TL866II Plus USB Programmer for 15000+IC SPI Flash NAND EEPROM MCU PIC AVR

The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. USB ASP AVR Programming Device for ATMEL Processors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no special USB controller is needed.