RAMPS 1.4 3D Printer 2004 LCD Controller With SD Card Slot in Pakistan
This Ramps shield Smart Controller contains a SD-Card reader, a rotary encoder and a 20 Character x 4 Line LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.
After connecting this panel to your Ramps you don’t need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
₨1,700
This Ramps Shield Smart Controller contains an SD-Card reader, a rotary encoder, and a 20 Character x 4 Line LCD display. You can easily connect it to your Ramps board using the “smart adapter” included.
After connecting this panel to your Ramps you don’t need your pc anymore, the Smart Controller supplies power for your SD card. Further, all actions like calibration and axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
Package includes:
- 1x Smart Adapter (Fully Assembled)
- 1x 5″ Smart Controller with built-in SD Card slot (Fully Assembled)
- 1x Set of 11″ Cables (Assembled)
- 1x Set of Headers to connect to your RAMPS 1.4 Board (May require Soldering)
Related products
- LCD Display Module
5 Inch Touch Screen HDMI LCD in Pakistan
The 5 Inch Touch Screen HDMI Interface TFT LCD Module is a good solution for those who are seeking a bigger resolution display. This TFT LCD Display for Raspberry Pi has a 5″ size which features 800×480 pixel resolution. Getting the Pi onto the display board is easy enough!!! make use of stand-off screws included in this pack to put the Raspberry Pi on the display board. But while you do this please ensure that the HDMI ports of both the Display and the Pi would line up with each other so that you will take advantage of the HDMI connector that we are providing in this product pack. This 5 Inch Touch Screen HDMI Interface TFT LCD Module is a mini panel-mountable HDMI monitor. Small and simple, yet you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to an electronic product. It features efficient operation by equipping the Backlight Power switch with which you can control the backlight whether to be on or off to save power. It has a 13×2 Pin Socket from where one can get 5V Power from Raspberry Pi to LCD and at the same time, transfer the touch signal back to Raspberry Pi. It also features an extended interface which is the replica of a 13×2 Pin Socket. Although the 800×480 common HDMI display is made for Raspberry Pi, you can use it on other compatible boards too.
SKU: D2230 - LCD Display Module
7 Inch HDMI Capacitive Touch LCD Screen For Raspberry Pi & Jetson Nano in Pakistan
Quick View
LCD Display Module7 Inch HDMI Capacitive Touch LCD Screen For Raspberry Pi & Jetson Nano in Pakistan
This 7″ Capacitive Touch Screen LCD enhances the UI experience in any project. This 7 inches touchscreen display supports various systems such as Raspberry Pi, Banana Pi, Banana Pro, BeagleBone Black, etc. The built-in HDMI interface enables the display to work as a computer monitor just like any other HDMI screen.
The LCD display comes with a preloaded Raspbian driver and Ubuntu image. While the touch display is controlled over the HDMI interface the touch control is done via a USB interface. To reduce power consumption backlight of the display panel can be switched on/off as per user preference.SKU: D2238 - LCD Display Module
Arduino Uno LCD TFT Shield For 40-Pin 8bit TFT LCD in Pakistan
Arduino Uno LCD TFT Shield For 40-Pin 8bit TFT LCD Overview. Arduino Uno LCD TFT Shield for 8-pin 40-bit TFT LCD is used for the purpose of transferring the communication voltage between LCD TFT (3V) and Arduino Uno or Mega2560 (5V) if directly connected LCD to Arduino Uno or Mega2560 will not be used can be used or burnt LCD due to the difference in communication voltage, the shield can be used with Arduino Uno or Mega2560 (or similar types of Arduino with foot type) and LCD supports 8bit Data communication standard or parallel both standards 8 / 16bit (does not support the 16 bit standard)
SKU: D2233 - LCD Display Module
PCF8574 IIC I2C Serial Interface Adaptor Module I2C LCD Module For Arduino In Pakistan
Quick ViewLCD Display ModulePCF8574 IIC I2C Serial Interface Adaptor Module I2C LCD Module For Arduino In Pakistan
This is a RoHS compliant I2C Serial LCD Daughter board that can be connected to a standard 16×2 or 20×4 Character Display Module that supports 4-bit mode. All Character Modules sold on our site support 4-bit mode, and nearly all commercially available 16×2 and 20×4 line character modules support it too. This board has a PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display. There are many examples on the internet for using this board with Arduino. Do a search for “Arduino LCD PCF8574“. The I2C address is 0x3F by default, but this can be changed via 3 solder jumpers provided on the board. This allows up to 3 LCD displays to be controlled via a single I2C bus (giving each one its own address).
SKU: D395,B106 - LCD Display Module
1602 LCD Green Display 16×2 Character LCD Module For Arduino In Pakistan
Quick ViewLCD Display Module1602 LCD Green Display 16×2 Character LCD Module For Arduino In Pakistan
1602 16×2 Green Backlight Character LCD Display For Arduino is a basic 16 character by 2 lines Alphanumeric display. This LCD 16×2 Character LCD Display has Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available. You will need a minimum of 6 general I/O pins to interface to this LCD screen. Includes LED backlight. Works in 4bit and 8 bit Mode.
SKU: D447,B106
Reviews
There are no reviews yet