LM35 Temperature Sensors In Pakistan
LM35 is an integrated analog temperature sensor whose electrical output is proportional to Degree Centigrade. LM35 Sensor does not require any external calibration or trimming to provide typical accuracies. The LM35’s low output impedance, a linear output, and precise inherent calibration make interfacing to readout or control circuitry especially easy. As such no extra components are required to interface LM35 to ADC as the output of LM35 is linear with a 10mv/degree scale. It can be directly interfaced to any 10 or 12-bit ADC.
In stock
₨200
In stock
LM35 is an integrated analog temperature sensor whose electrical output is proportional to Degree Centigrade. LM35 Sensor does not require any external calibration or trimming to provide typical accuracies. The LM35’s low output impedance, a linear output, and precise inherent calibration make interfacing to readout or control circuitry especially easy. As such no extra components are required to interface LM35 to ADC as the output of LM35 is linear with a 10mv/degree scale. It can be directly interfaced to any 10 or 12-bit ADC.
Specification of LM35 Temperature Sensors:
- Model: LM35
- Package/Case:TO-92-3
- Mounting Type: Through Hole
- Sensor Type: Temperature Sensor
- Output Type: Analog Voltage
- Maximum Supply Voltage (V): 30
- Minimum Supply Voltage (V): 4
- Operating Temperature Range (°C): -55 to 150
Feature of LM35 integrated analog Temperature Sensors:
- Calibrated directly in Degree Celsius (Centigrade)
- Linear at 10.0 mV/°C scale factor
- 0.5°C accuracy guarantee-able (at a25°C)
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 mA current drain
- Low self-heating, 0.08°C in still air
- Non-linearity only 0.25°C typical
- Low impedance output, 0.1Ωfor 1 mA load
Package Include:
- 1 x LM35 Temperature Sensors In Pakistan
Related products
- Temperature and Humidity Sensor Module
DS18B20 Waterproof Temperature Sensor Digital Temperature Probe In Pakistan
Quick View
Temperature and Humidity Sensor ModuleDS18B20 Waterproof Temperature Sensor Digital Temperature Probe In Pakistan
This is the DS18B20 Water Proof Temperature Probe which is based on the DS18B20 sensor. It is very handy when you need to measure something far away, or in wet conditions. Because they are digital, you don’t get any signal degradation even over long distances. These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems. When using with a microcontroller put a 4.7k resistor to the sensing pin, which is required as a pull-up from the DATA to VCC line.
SKU: D1151 - Temperature and Humidity Sensor Module
KY 001 KY-001 3Pin DS18B20 Temperature Sensor Module In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleKY 001 KY-001 3Pin DS18B20 Temperature Sensor Module In Pakistan
DS18B20 Temperature Sensor Module is a digital temperature sensor, and you can easily connect it to Arduino with only one 4.7-pound resistor, base 1 – Ground 2 – Output – Base 3 to the positive of the source, with resistance to base 2 Is connected. The connection of this sensor to the Arduino via the 1-wire protocol is established. Therefore, several sensors can be connected only through one common wire to Arduino. The output is digitally accurate to 12 bits. Therefore, the temperature can be measured with a precision of 0.0625 º C.
SKU: D1153 - Temperature and Humidity Sensor Module
KY 028 KY-028 Digital Thermistor Temperature Sensor Module For Arduino In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleKY 028 KY-028 Digital Thermistor Temperature Sensor Module For Arduino In Pakistan
Digital Temperature Sensor KY-028 for Arduino, measures temperature changes based on the thermistor resistance. This module has both digital and analog outputs, there’s a potentiometer to adjusts the detection threshold on the digital interface.
SKU: D167,SB54 - Temperature and Humidity Sensor Module
DHT22 AM2302 Temperature And Humidity Sensor In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleDHT22 AM2302 Temperature And Humidity Sensor In Pakistan
AM2302 output calibrated digital signal. It applies exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Its sensing elements are connected to an 8-bit single-chip computer. Every sensor of this model is temperature compensated and calibrated in an accurate calibration chamber and the calibration coefficient is saved in the type of program in OTP memory when the sensor is detected, it will cite the coefficient from memory.
SKU: D1206 - Temperature and Humidity Sensor Module
KY 015 KY-015 DHT-11 DHT11 Digital Temperature And Relative Humidity Sensor Module for Arduino In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleKY 015 KY-015 DHT-11 DHT11 Digital Temperature And Relative Humidity Sensor Module for Arduino In Pakistan
KY015 Ky 015 KY-015 Arduino DHT11 DHT 11 DHT-11 temperature and humidity sensor module provide a digital serial interface to measure humidity and temperature.
SKU: D176,SB102
Reviews
There are no reviews yet