USB ASP USBASP Microcontroller Programmer In Pakistan
The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. USB ASP AVR Programming Device for ATMEL Processors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no special USB controller is needed.
₨650
The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. USB ASP AVR Programming Device for ATMEL Processors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no special USB controller is needed.
Specifications and Features :
- Model No.: USB ASP AVR Programming Device for ATMEL Processors
- Compatible Chips:
- ATMega Series
- Tiny Series
- Classic Series
- CAN Series
- PWM Series
Features of USBASP Programmer
- Support for AVRDude Allows you to read or write the microcontroller EEPROM, firmware, fuse bits, and lock bits Support for Linux, Mac OS X, and Windows XP,7,8 5 KB/sec maximum write speed Software controlled SCK option to support targets with low clock speed (< 1.5MHz) 10 pin ISP interface Supported microcontrollers include:
- Mega Series : ATmega8, ATmega48, ATmega88, ATmega168, ATmega328, ATmega103, ATmega128, ATmega1280, ATmega1281, ATmega16, ATmega161, ATmega162, ATmega163, ATmega164, ATmega169, ATmega2560, ATmega2561, ATmega32, ATmega324, ATmega329, ATmega3290, ATmega64, ATmega640, ATmega644, ATmega649, ATmega6490, ATmega8515, ATmega8535.
- Tiny Series : ATtiny12, ATtiny13, ATtiny15, ATtiny25, ATtiny26, ATtiny45, ATtiny85, ATtiny2313.
- Classic Series: AT90S1200, AT90S2313, AT90S2333, AT90S2343, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535.
- CAN Series: AT90CAN128
- PWM Series: AT90PWM2, AT90PWM3.
Package Includes :
- 1 x USB ASP USBASP Microcontroller Programmer In Pakistan
Related products
- Programmers
SOIC8 SOP8 Flash Chip IC Test Clip Adaptor Socket For EEPROM Bios 93CXX 25CXX 24CXX Programmer In Pakistan
Quick View
ProgrammersSOIC8 SOP8 Flash Chip IC Test Clip Adaptor Socket For EEPROM Bios 93CXX 25CXX 24CXX Programmer In Pakistan
This is an SPI BIOS FLASH Non-Dismantling Test Program IC programming clip that is perfect for reading or writing EEPROMs. This clip allows for in-circuit programming of SOP8 chips. Now you can program SOP8 chips without having to remove them from the circuit board, just clip to the chip and use one of the two breakout adapter boards to connect to your programmer. The ISP cable is wired 1:1 so will support any programmer that has a ZIF/DIL socket and supports ISP/ICSP Mode.
SKU: D1304 - Programmers
RT809H EMMC NAND FLASH Programmer BIOS Programmer in Pakistan
This is Universal Programmer RT809H for NOR NAND EMMC EC MCU ISP programmer. RT809H Universal Programmer is for eMMC CAR DVD SMART TV BIOS programming. RR809H Supports FullLCD TV FLASH drivers reading and write unlimited capacity TSOP48 NAND FLASH EMMC TSOP56 pin TOP8-16 pin Support CAR DVD, SMART TV.
SKU: D650 - Programmers
CH341A Programmer For Dish TV Laptop Memory IC in Pakistan
This low-cost mini USB CH341A Programmer is intended to support 24 EEPROM and 25 SPI flash 8pin/16 pin chips. CH341A Programmer is equipped with a CH 341A chip, can automatically recognize 25 series chips, and its 24/25 series indicator lamp enables the user to easily recognize the module’s working status. This CH341A Programmer is awesome and user-friendly because it supports USB to TTL conversion and the SOP8 SOP16 to DIP8 converter board makes the connection with different chips easily.CH341 is a USB bus convert chip, providing UART, printer port, parallel and synchronous serial with 2-wire or 4-wire through the USB bus. In UART mode, CH341 provides alternant rate control signals such as serial transfer enable, serial receive in ready, etc. It also supplies a common MODEM communication signal in order to expand UART for a computer or upgrade the common synchronous interface device to a USB bus directly. In printer port mode, CH341 supplies a standard USB printer port that compounds USB-relevant protocol and Windows operating system used to upgrade the ordinary parallel printer to USB bus directly. In parallel mode, CH341 gives out 8-bit parallel in EPP or MEM mode. It can be used to input/output data directly without MCU/DSP. Besides, CH341A also supports some common synchronous serial such as 2-wire (SCL, SDA) and 4-wire (CS, SCK/CLK, MISO/SDI/DIN, and MOSI/SDO/DOUT) interface. Click on the picture to see suitable socked to program 25q32
SKU: D642
Reviews
There are no reviews yet