L298N Dual Motor Driver IC in Pakistan
L298N Dual Motor Driver IC is an integrated monolithic circuit in a 15-lead Multiwatt and PowerSO20 packages. It is a high voltage, a high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC, and stepping motors. Two enable inputs are provided to enable or disable the device independently of the input signals. The emitters of the lower transistors of each bridge are connected together and the corresponding external terminal can be used for the connection of an external sensing resistor. An additional supply input is provided so that the logic works at a lower voltage.
₨340
L298N Dual Motor Driver IC is an integrated monolithic circuit in a 15-lead Multiwatt and PowerSO20 packages. It is a high voltage, a high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC, and stepping motors. Two enable inputs are provided to enable or disable the device independently of the input signals. The emitters of the lower transistors of each bridge are connected together and the corresponding external terminal can be used for the connection of an external sensing resistor. An additional supply input is provided so that the logic works at a lower voltage.
Features of L298 High Current Dual H-Bridge Motor Driver IC:
- Operating Supply Voltage Up To 46 V.
- Total DC Current Up To 4 A.
- Low Saturation Voltage Overtemperature Protection.
- Logical “0” Input Voltage Up To 1.5 V.
- High Noise Immunity.
Applications of L298 High Current Dual H-Bridge Motor Driver IC:
- High Current Motor Driver IC.
- Dual H-bridge for controlling up to two motors at a time.
- Ideal for Inductive load decoupling from the main/control unit.
- A wide voltage range allows for an adaptive voltage range control.
Package Includes:
- 1 x L298N Dual Motor Driver IC in Pakistan
Related products
- Power Management ICs
AMS1117 3.3V 1A SMD SOT-223 DC Voltage Regulator IC In Pakistan
The AMS1117 series of adjustable and fixed voltage regulators are designed to provide up to1A output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed a maximum of 1.3V, decreasing at lower load currents.
On-chip trimming adjusts the reference voltage to 1.5%. The current limit is set to minimize the stress under overload conditions on both the regulator and power source circuitry. The AMS1117 devices are pin-compatible with other three-terminal SCSI regulators and are offered in the low profile surface mount SOT-223 package, in the 8L SOIC package, and in the TO-252 (DPAK) plastic package.SKU: D300 - Power Management ICs
LM78L05 78L05 SMD Voltage Regulator SOT-82 In Pakistan
The 78L05 5V 100mA Voltage Regulator SOT-82 is an electronic circuit that provides a constant output DC voltage for a varied input voltage. The output current of the 78L05 can go up to 100mA, with an output voltage tolerance of +/-5%. The 78L05 5V 100mA Voltage Regulator has internal thermal overload protection and short-circuits the current limit.
SKU: D1210 - Power Management ICs
LM7808 L7808 7808 Linear Voltage Regulator IC In Pakistan
The LM7808CV is a fixed output, three-terminal precision positive voltage regulator in 3 pins TO-220 package. This regulator can provide local on-card regulation by eliminating distribution problems associated with single-point regulation. The L7808 fixed voltage regulator is designed with thermal overload protection that shuts down the circuit when subjected to an excessive power overload condition, internal short circuit protection that limits the maximum current the circuit will pass, and output transistor safe area compensation that reduces the output short circuit as the voltage across the pass transistor is increased.
SKU: D1208
Reviews
There are no reviews yet