DS18B20 18B20 Temperature Sensor In Pakistan

If You are wandering to Build a Device That is used to measure the temperature of a hot object like machines, flames, hot iron, or device CPU. Then this Sensor is Needed for you. The MLX90614 ESF is an Infra-Red thermometer for non-contact temperature measurements. Both the IR-sensitive thermopile detector chip and the signal conditioning ASIC are integrated into the same TO-39 can. The Integrated MLX90614 GY-906 is a low noise amplifier, 17-bit ADC, and powerful DSP unit thus achieving high accuracy and resolution of the thermometer.

AM2302 output calibrated digital signal. It applies exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Its sensing elements are connected to an 8-bit single-chip computer. Every sensor of this model is temperature compensated and calibrated in an accurate calibration chamber and the calibration coefficient is saved in the type of program in OTP memory when the sensor is detected, it will cite the coefficient from memory.

This is the DS18B20 Water Proof Temperature Probe which is based on the DS18B20 sensor. It is very handy when you need to measure something far away, or in wet conditions. Because they are digital, you don’t get any signal degradation even over long distances. These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems. When using with a microcontroller put a 4.7k resistor to the sensing pin, which is required as a pull-up from the DATA to VCC line.