KY 013 KY-013 Analog Temperature Sensor Module For Arduino In Pakistan
The KY-013 Analog Temperature Sensor module consists of an NTC thermistor and a 10 kΩ resistor. The resistance of the thermistor varies with the surrounding temperature, we’ll use the Steinhart–Hart equation to derive the precise temperature of the thermistor.
₨100
Specification of KY-013 Analog Temperature Sensor Module For Arduino:
- Type: Temperature Sensor
- Model: KY-013
- Operating Voltage:5V
- Temperature measurement range:-55°C to 125°C [-67°F to 257°F]
- Measurement Accuracy:±0.5°C
- Dimensions: 3 x 1.5 x 0.6cm
Package Include:
- 1 x KY-013 Analog Temperature Sensor Module For Arduino In Pakistan
Related products
- Temperature and Humidity Sensor Module
MLX90614 GY-906 Digital Infrared Temperature Sensor Module In Pakistan
Quick View
Temperature and Humidity Sensor ModuleMLX90614 GY-906 Digital Infrared Temperature Sensor Module In Pakistan
If You are wandering to Build a Device That is used to measure the temperature of a hot object like machines, flames, hot iron, or device CPU. Then this Sensor is Needed for you. The MLX90614 ESF is an Infra-Red thermometer for non-contact temperature measurements. Both the IR-sensitive thermopile detector chip and the signal conditioning ASIC are integrated into the same TO-39 can. The Integrated MLX90614 GY-906 is a low noise amplifier, 17-bit ADC, and powerful DSP unit thus achieving high accuracy and resolution of the thermometer.
SKU: D1156 - Temperature and Humidity Sensor Module
KY 001 KY-001 3Pin DS18B20 Temperature Sensor Module In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleKY 001 KY-001 3Pin DS18B20 Temperature Sensor Module In Pakistan
DS18B20 Temperature Sensor Module is a digital temperature sensor, and you can easily connect it to Arduino with only one 4.7-pound resistor, base 1 – Ground 2 – Output – Base 3 to the positive of the source, with resistance to base 2 Is connected. The connection of this sensor to the Arduino via the 1-wire protocol is established. Therefore, several sensors can be connected only through one common wire to Arduino. The output is digitally accurate to 12 bits. Therefore, the temperature can be measured with a precision of 0.0625 º C.
SKU: D1153 - Temperature and Humidity Sensor Module
DHT22 Digital Temperature and Humidity Sensor Module AM2302 In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleDHT22 Digital Temperature and Humidity Sensor Module AM2302 In Pakistan
If you are wondering to build a device that detects temperature and humidity from the atmosphere, then This sensor is needed for you. you can Purchase this sensor from DAROGHAWALA.ORG at a reasonable price. The DHT22 Digital Temperature and Humidity Sensor Module AM2302 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins are needed). It’s fairly simple to use but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.
SKU: D1155 - Temperature and Humidity Sensor Module
DHT22 AM2302 Temperature And Humidity Sensor In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleDHT22 AM2302 Temperature And Humidity Sensor In Pakistan
AM2302 output calibrated digital signal. It applies exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Its sensing elements are connected to an 8-bit single-chip computer. Every sensor of this model is temperature compensated and calibrated in an accurate calibration chamber and the calibration coefficient is saved in the type of program in OTP memory when the sensor is detected, it will cite the coefficient from memory.
SKU: D1206 - Temperature and Humidity Sensor Module
KY 028 KY-028 Digital Thermistor Temperature Sensor Module For Arduino In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleKY 028 KY-028 Digital Thermistor Temperature Sensor Module For Arduino In Pakistan
Digital Temperature Sensor KY-028 for Arduino, measures temperature changes based on the thermistor resistance. This module has both digital and analog outputs, there’s a potentiometer to adjusts the detection threshold on the digital interface.
SKU: D167,SB54
Reviews
There are no reviews yet