- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
7409 Quad Two input AND, Open collector in Pakistan
7409 Quad Two input AND, Open collector in Pakistan
7409 Quad Two input AND, Open collector in Pakistan
Packing list:
- 1x 7409 Quad Two input AND, Open collector
Related products
- 74LS And 74HC Series IC
NAND GATES IC 74HC00 Nand IC 7400 74LS00 in Pakistan
0 out of 5(0)The NAND GATES IC 74HC00 Nand IC 7400 74LS00 provides four independent 2-input NAND gates with standard push-pull outputs. The device is designed for operation with a power supply range of 2.0V to 6.0V.
SKU: D2003 - 74LS And 74HC Series IC
74LS138 – 3 to 8 Decoder De-Multiplexer IC in Pakistan
0 out of 5(0)The 74LS138 is a 3:8 Decoder IC that is commonly used in decoding or de-multiplexing circuits for memory decoding or data routing purposes. It is designed for high-speed operations and has three enable pins to make it easier to cascade with other ICs. The device decodes 1-of-8 lines, set by x3 binary select inputs & three enable inputs. The LS138 can be used as an 8- output demultiplexer by using one active LOW Enable input as data input & the other Enable inputs as strobes. The IC has an operating voltage from 1.0V to 5.5V with a low power consumption of 32mW. The propagation delay is around 21nS.
SKU: D2020 - 74LS And 74HC Series IC
74LS148 3-Bit Priority Encoder IC (74148 IC) DIP-16 in Pakistan
0 out of 5(0)74LS Series ICs are High-Speed Logic gates, ideally a little faster than the 74HC series but more power consumption is required. They are implemented with a Low-Power Schottky diode technology to achieve high switching speed. 74LS148 is one of the 74LS series IC. 74LS148 ICs contain an 8 to 3-Bit priority encoder that converts 8 Data Lines to 3-Line binary. Cascading circuitry (enable input EI and enable output EO) has been provided to allow octal expansion without the need for external circuitry.
SKU: D2024 - 74LS And 74HC Series IC
74LS283 in Pakistan
0 out of 5(0)These full adders perform the addition of two 4-bit binary
numbers. The sum (R) outputs are provided for each bit and
the resultant carry (C4) is obtained from the fourth bit.
These adders feature a full internal look ahead across all four
bits. This provides the system designer with a partial lookahead
performance at the economy and reduced package
count of a ripple-carry implementation.SKU: D2018







Reviews
There are no reviews yet