- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
Battery Management System (BMS) Modules
Showing 1–20 of 34 results
- Battery Management System (BMS) Modules
1S 3.7V 3A Li-ion BMS PCB Battery Protection Board For 18650 Lithium Ion Li Battery In Pakistan
Quick View
Battery Management System (BMS) Modules1S 3.7V 3A Li-ion BMS PCB Battery Protection Board For 18650 Lithium Ion Li Battery In Pakistan
The 1s 3a 3.7v Li-Ion Bms PCB Protection Board uses the original Fujing imported components. With overcharge, over-discharge, over current, short circuit, and other protection functions, for a variety of shapes of various shapes 3.7V lithium battery. It adopts rich crystal protection IC, high-quality MOSFETs such as VISHAY, AOS, and IR, FR-4 low-temperature coefficient plate, excellent design, fine workmanship, and comprehensive test. It is small in size and suitable for many applications requiring high integration and low cost. It can meet various performance requirements and ensure the absolute safety and reliability of the battery pack.
SKU: D287,SB22 - Battery Management System (BMS) Modules
2S 7.4V 3A BMS PCB Battery Protection Board For 18650 Li-ion Lithium-Ion Battery In Pakistan
Quick View
Battery Management System (BMS) Modules2S 7.4V 3A BMS PCB Battery Protection Board For 18650 Li-ion Lithium-Ion Battery In Pakistan
2S 7.4V 8.4V 3A BMS PCB Battery Protection Board For 18650 Charger Protection Board Module is a small PCB mounted Li-ion Lithium Battery charger protection module. This small and smart battery charger protection module comes with various features like Short circuit protection, Overcharge protection, Over-discharge protection, Overcurrent protection. It is very easy to install and convenient to use in all your DIY portable projects.
SKU: D288,SB23 - Battery Management System (BMS) Modules
2S 7.4V 8A BMS PCB Battery Protection Board For 18650 Li-ion Lithium-Ion Battery In Pakistan
-12%Quick View
Battery Management System (BMS) Modules2S 7.4V 8A BMS PCB Battery Protection Board For 18650 Li-ion Lithium-Ion Battery In Pakistan
A battery management system (BMS) is an electronic regulator that monitors and controls the charging and discharging of rechargeable batteries. Battery BMS protection boards are the brains behind battery packs. 2S 8A BMS manages the output, charging, and discharging and also provides critical safeguards to protect the batteries from damage. 18650 protection circuit Board is a high-accuracy voltage detection circuit. The 8A protection board can not be used for lithium-ion batteries.
SKU: D289,SB24 - Battery Management System (BMS) Modules
3S 20A BMS Battery Protection Board For 18650 Lithium Battery In Pakistan
Quick View
Battery Management System (BMS) Modules3S 20A BMS Battery Protection Board For 18650 Lithium Battery In Pakistan
3S 12.6V 20A BMS Li-ion Lithium Battery 18650 PCB Charger Protection Board. Lithium Batteries BMS with 10.8V rated voltage for polymer battery, 11.1V 18650, or 3.7V lithium battery rated voltage and 12.6V lithium battery can be charged. And discharge 20A (referring to the maximum discharge current limit) Lithium battery protection board also comes with over-charge, over-discharge, over-current, short circuit protection. A battery pack built together with a battery management system with an external communication data bus is a smart battery pack. A smart battery pack must be charged by a smart battery charger.
SKU: D295,SB26 - Battery Management System (BMS) Modules
3S 25A BMS PCB Battery Charging Protection For Lithium Ion 18650 Cell In Pakistan
Quick View
Battery Management System (BMS) Modules3S 25A BMS PCB Battery Charging Protection For Lithium Ion 18650 Cell In Pakistan
This is 3S 12V 25A 18650 Lithium Battery Protection Board 11.1V 12.6V High Current With Balanced Circuit Over Charge Over-Discharge Over Current And Short Circuit Protection Function. Board charging and discharging are the same port, the board includes the balanced circuit.When the charge balance, the board will be a bit warm, even after disconnecting the charger, some are still in the balance, will continue to warm for a while until below the equilibrium break threshold.The protection board cannot be used for iron lithium polymer batteries (for other batteries, no matter what material, as long as the overvoltage and put voltage can be used for cutting), electric finish machinery, electric bicycle batteries, car, and motorcycle starter battery protection.SKU: D310,SB27 - Battery Management System (BMS) Modules
3S 40A BMS 11.1V 12.6V 18650 Lithium Battery Protection Board In Pakistan
Quick View
Battery Management System (BMS) Modules3S 40A BMS 11.1V 12.6V 18650 Lithium Battery Protection Board In Pakistan
The 3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 40A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter. (if the cooling environment is not good, please reduce the load current use).The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is suitable for starting current below 80A, power 135W below the drill (with balance).
SKU: D311,SB28 - Battery Management System (BMS) Modules
3s/4s/5s BMS 12V 16.8v 18V 3.2V 100A BMS For LifePo4 Lithium iron phosphate Lithium Battery Protection Circuit Board Li-polymer Balance Charging Module
-20%Quick View
Battery Management System (BMS) Modules3s/4s/5s BMS 12V 16.8v 18V 3.2V 100A BMS For LifePo4 Lithium iron phosphate Lithium Battery Protection Circuit Board Li-polymer Balance Charging Module
BMS (Battery Management System) – a battery management system that is designed to monitor the status of batteries, control the process of charging/discharging the battery, etc. This Module has Protection against short circuits and protection against over-discharge. The module is to turn off the power supply for the batteries when reaching the maximum capacity of all batteries (balancing). The battery charge is switched off when the voltage reaches cell cutt of voltage and the discharge when the voltage drops to 2.3 – 3.0 V.
Five, four, or three batteries can be connected to this module at the same time. By default, the circuit is assembled to work with 5 batteries. To switch to a 3 or 4 battery mode, it is necessary to solder a jumper or SMD resistor marked “0” in the appropriate placesSKU: D2303 - Battery Management System (BMS) Modules
4S 40A 14.8V BMS Lithium ion 18650 Battery Protection Board With Balancer In Pakistan
-33%Quick View
Battery Management System (BMS) Modules4S 40A 14.8V BMS Lithium ion 18650 Battery Protection Board With Balancer In Pakistan
The 4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module comes with recovery function – AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 40A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter. (If the cooling environment is not good, please reduce the load current use).The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650, 26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is suitable for starting current below 80A, power 135W below the drill (with balance).
SKU: D318,SB34
