- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
Shop
Showing 861–880 of 2348 results
- Arduino Shield
Arduino CNC Shield V3 A4988 DRV8825 Driver Expansion Board In Pakistan
This expansion board as a driver expansion board can be used for engraving machines, 3D printers, and CNC. It is a total of four slots and can drive four A4988 stepper motors. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed by three stepper motors.
SKU: D1099 - Arduino Board
Arduino Due AT91SAM3X8E ARM Cortex M3 Board In Pakistan
This Arduino Due microcontroller is based on the board of Atmel SAM3X8E ARM CortexM3 CPU. This Arduino due board is based on 32 32-bit ARM core microcontroller. Atmel SAM3X8E Arduino board contains 54 digital input/ output pins, 12 analog inputs, 4 UARTs, an 84 Mhz clock, a USB OTG capable connection, 2 DAC and DAC stands for Digital to Analog Converter, 2 TWI, a power jack, an SPI header, a JTAG header, a reset button, and an erase button. The Arduino board contains everything needed to support the microcontroller.
SKU: D100,B93 - Arduino Board
Arduino Lily Pad ATmega328P Board In Pakistan
The LilyPad Arduino 328 Main Board is an Arduino-program micro-controller design to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package design to minimize snagging and profile. With wide tabs that can be sewn down and connect with conductive thread. The LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch).LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
SKU: D103 - Arduino Board
Arduino LilyPad ATmega32U4 In Pakistan
This is the LilyPad Arduino USB board, controlled by an ATmega32U4 with the Arduino bootloader. It has a built in power supply socket and an on/off switch with the only extra piece of hardware you need to program the LilyPad USB is a micro-USB cable since the new IC has built-in USB support. Any of our LiPo batteries can be plugged right into the JST socket to provide you with easy, on-the-go power. That LiPo battery is even rechargeable through the board, no more special external LiPo chargers are required! Just like the LilyPad Simple, this board operates at 3.3V and features a JST socket so you can directly connect a Li-Po battery for power and an on-board power switch so you can turn it off when you’re not feeling particularly blinky. The LilyPad Arduino USB was designed to streamline your next sewable project by keeping things simple and giving you more room to work while eliminating the need to sew a power supply.LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
SKU: D102 - Arduino Board
Arduino Mega 2560 PRO Mini in Pakistan
Arduino Mega 2560 PRO MINI it is version PRO of Arduino Mega 2560 R3. Built on the Atmel ATmega2560 microcontroller. The board has a compact size of 38×52mm. It is a good solution, to make your final project on a solder prototyping board. You can find all pinouts on board: digital’s I/O – 70 and analog’s input – 16.Mega 2560 PRO MINI as functionality similar to the Arduino Mega 2560. It is built on a MINI board, but the same stable, and uses the original chips ATmega2560 (16MHz). The board has a USB interface, based on USB-serial converter CH340G. For connecting to the PC, pls use the Micro USB cable.
SKU: D101 - Arduino Board
Arduino Mega 2560 R3 16U2 Development Board In Pakistan
The Arduino Mega 2560 R3 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Mega 2560 R3 board is compatible with most shields designed for Arduino/Genuino Uno and the former boards Duemilanove or Diecimila.
SKU: D99,B93 - Arduino Board
Arduino Mega 2560 R3 CH340 Development Board In Pakistan
The Mega 2560 is a microcontroller board base on the CH340. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Duemilanove or Diecimila.
SKU: D1855 - Arduino Acrylic Case
Arduino Mega 2560 R3 Transparent Acrylic Case in Pakistan
Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino Mega 2560 R3 enclosure box is made by high-grade acrylic, which provides excellent protection. This is unique design provides an easy connection to other components. The dimension of the enclosure box is the same as the original Arduino MEGA2560 R3.
SKU: D113,B91 - Arduino Shield
Arduino MEGA Prototype Shield v3.0 With breadboard In Pakistan
The Prototype Shield V3.0 For Arduino Mega with a breadboard to build the circuit. You can solder the components on this shield and also you can set up a circuit through the mini breadboard. Prototype Shield V3.0 For Arduino Mega with breadboard adopts the prototype V3 gold PCB sink process, mainboard golden square pad spacing small, welding components more convenient; SOP28 SMT components encapsulation makes it Arduino electronic lovers handier, not be straight bound by inserted components.
SKU: D111,B94 - Arduino Shield
Arduino Mega Sensor Shield V2 in Pakistan
The motherboard will not only be extended to the steering gear line order from ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 radio frequency module communication interface, and RB URF v1.1 ultrasonic sensor interface, and independent expansion are easier to use conveniently.
SKU: D110,B94 - Arduino Board
Arduino Micro 5V 16M Atmega32u4 Micro-controller Development Board In Pakistan
Quick View
Arduino BoardArduino Micro 5V 16M Atmega32u4 Micro-controller Development Board In Pakistan
Arduino Micro ATmega32U4 is essentially a shrunk-down (1.9″ × 0.7″) version of the Arduino Leonardo: it is a microcontroller board based on the ATmega32U4 running at 16 MHz with 24 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs). This board ships with the male header pins soldered in, as shown in the product picture.
SKU: D91 - Arduino Shield
Arduino Nano Sensor Shield Nano I/O Expansion Board Prototype Shield In Pakistan
Quick ViewArduino ShieldArduino Nano Sensor Shield Nano I/O Expansion Board Prototype Shield In Pakistan
This Nano Multi-Function expansion board is designed especially for Nano, solves the problem of wiring confusion when a variety of sensors connected. Nano Breakout Board Lead out all digital IO ports and analog IO ports, each one with a standard positive and negative power interface. Arduino Nano Sheild Lead out the I2C interface of the mainboard for a convenient connection. Arduino Nano Prototype Board is Increasing the DC power supply interface. Nano USB interface supply current is actually only 50MA, so bring high-current devices, such as the steering, is obviously insufficient. So in the DC power connector provide an external power supply to ensure the stability of equipment operation.
SKU: D109 - Arduino Board
Arduino Nano V3 Atmega328p Development Board With USB Cable In Pakistan
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). Arduino Nano has more or less the same functionality as the Arduino UNO but in a different package. Arduino Nano lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
SKU: D93
