- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
T74LS05B1 T74LS 05B1 S05B1 AND Gate IC in Pakistan
T74LS05B1 T74LS 05B1 S05B1 AND Gate IC in Pakistan
T74LS05B1 T74LS 05B1 S05B1 AND Gate IC in Pakistan
Packing list:
- 1x T74LS05B1 T74LS 05B1 S05B1 AND Gate IC
Related products
- 74LS And 74HC Series IC
74193 Synchronous 4 Bit Binary Counter DIP IC SN74LS193N 74HC193 in Pakistan
Quick View74LS And 74HC Series IC74193 Synchronous 4 Bit Binary Counter DIP IC SN74LS193N 74HC193 in Pakistan
0 out of 5(0)This circuit is a synchronous up/down 4-bit binary counter. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change together when so instructed by the steering logic. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple clock) counters. The outputs of the four master-slave flip-flops are triggered by a low-to-high level transition of either count (clock) input. The direction of counting is determined by which count input is pulsed while the other count input is held high. The counter is fully programmable; that is, each output may be preset to either level by entering the desired data at the inputs while the load input is low. The output will change independently of the count pulses.
SKU: D2015 - 74LS And 74HC Series IC
7404 74LS04 74HC04 Hex Inverter IC in Pakistan
0 out of 5(0)The 7404 is a triple-buffered inverter. It has high noise immunity and the ability to drive 10 LS-TTL loads. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
SKU: D2004 - 74LS And 74HC Series IC
74LS138 – 3 to 8 Decoder De-Multiplexer IC in Pakistan
0 out of 5(0)The 74LS138 is a 3:8 Decoder IC that is commonly used in decoding or de-multiplexing circuits for memory decoding or data routing purposes. It is designed for high-speed operations and has three enable pins to make it easier to cascade with other ICs. The device decodes 1-of-8 lines, set by x3 binary select inputs & three enable inputs. The LS138 can be used as an 8- output demultiplexer by using one active LOW Enable input as data input & the other Enable inputs as strobes. The IC has an operating voltage from 1.0V to 5.5V with a low power consumption of 32mW. The propagation delay is around 21nS.
SKU: D2020
Reviews
There are no reviews yet