- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
74LS And 74HC Series IC
SN 74185 an Texas Instruments Binary-to-bcd Converter Dip 16 in Pakistan
SN74185 AN original Texas Instruments Binary-to-BCD Converter DIP16
₨395
SN74185 AN original Texas Instruments Binary-to-BCD Converter DIP16
Packing list:
- 1x SN 74185 an Texas Instruments Binary-to-bcd Converter Dip 16 in Pakistan
Add a review
You must be logged in to post a review
Log In
Related products
- 74LS And 74HC Series IC
7490 74LS90 IC Decade Counter in Pakistan
Each counter has a divide-by-two section and either a divide-by-five (LS90), divide-by-six (LS92) or divide-by-eight (LS93) section which are triggered by a HIGH-to-LOW transition on the clock inputs. Each section can be used separately or tied together (Q to CP) to form BCD, bi-quinary, modulo-12, or modulo-16 counters. All of the counters have a 2-input gated Master Reset (Clear), and the LS90 also has a 2-input gated Master Set (Preset 9).
SKU: D2012 - 74LS And 74HC Series IC
74LS189 64 Bit RAM with 3 State Output IC 74189 74HC189 in Pakistan
Quick View
74LS And 74HC Series IC74LS189 64 Bit RAM with 3 State Output IC 74189 74HC189 in Pakistan
The 74LS189 is a high-speed 64-bit RAM organized as a 16-word by the 4-bit array. Address inputs are buffered to minimize loading and are fully decoded on-chip. The outputs are 3-state and are in the high impedance state whenever the Chip Select (CS) input is HIGH. The outputs are active only in the read mode and the output data is the complement of the stored data.
SKU: D2011 - 74LS And 74HC Series IC
74LS138 – 3 to 8 Decoder De-Multiplexer IC in Pakistan
The 74LS138 is a 3:8 Decoder IC that is commonly used in decoding or de-multiplexing circuits for memory decoding or data routing purposes. It is designed for high-speed operations and has three enable pins to make it easier to cascade with other ICs. The device decodes 1-of-8 lines, set by x3 binary select inputs & three enable inputs. The LS138 can be used as an 8- output demultiplexer by using one active LOW Enable input as data input & the other Enable inputs as strobes. The IC has an operating voltage from 1.0V to 5.5V with a low power consumption of 32mW. The propagation delay is around 21nS.
SKU: D2020
Reviews
There are no reviews yet