- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
Power Management ICs
Compare
FP5138 Boost Controller SMD IC in Pakistan
The Boost Controller IC FP5138 is a boost topology switching regulator control IC for the battery-used applications field. This IC controller FP5138 includes a totem-pole single output stage for driving an NPN transistor or N-MOS. This converter IC is a high-precision reference (0.5V) for comparing output voltage with feedback amplifier, and internal dead-time control for controlling the minimum duty cycle. This boost converter is a programmable soft start with short circuit protection function and logic level control for operating mode or standby mode.
₨30
The Boost Controller IC FP5138 is a boost topology switching regulator control IC for the battery-used applications field. This IC controller FP5138 includes a totem-pole single output stage for driving an NPN transistor or N-MOS. This converter IC is a high-precision reference (0.5V) for comparing output voltage with feedback amplifier, and internal dead-time control for controlling the minimum duty cycle. This boost converter is a programmable soft start with short circuit protection function and logic level control for operating mode or standby mode.
Features & Specifications Of Boost Convert Control IC FP513:
- Wide supply voltage operating range: 1.8 to 15V.
- Reference voltage precision: 4%.
- Low current consumption: Operation Mode 5.5mA, Standby-by Mode 1μA.
- High-speed oscillator frequency: 1MHz max.
- Programmable Soft-Start function (SS).
- Short Circuit Protection function(SCP).
- Totem-pole output with adjustable on/off current (for NPN transistors or n-channel MOSFET).
- Logic level control standby mode function.
Applications Of non-synchronous PWM Boost Controller:
- Digital Camera
- PDA
- Portable Equipment
Package Includes:
- 1 x FP5138 Boost Controller IC
Add a review
You must be logged in to post a review
Log In
Related products
- Power Management ICs
L293D IC Dual H-Bridge Motor Driver In Pakistan
The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC, and stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage, and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz. The L293D is assembled in a 16-lead plastic package that has 4 center pins connected together and used for heatsinking.
SKU: D2084 - Power Management ICs
LM2901N Differential Comparator IC In Pakistan
A comparator is a device that compares two voltages or currents and outputs a digital signal indicating which is larger. The LM2901N devices consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. The current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.
SKU: D2090 - Power Management ICs
ULN2803 ULN2803A ULN2803APG IC In Pakistan
The ULN2803A is a high-voltage, high-current Darlington transistor array. The device consists of eight NPN Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads. The collector-current rating of each Darlington pair is 500 mA. The Darlington pairs may be connected in parallel for higher current capability. Applications include relay drivers, hammer drivers, lamp drivers, display drivers (LED and gas discharge), line drivers, and logic buffers. The ULN2803A has a 2.7-k series base resistor for each Darlington pair for operation directly with TTL or 5-V CMOS devices
SKU: D2083 - Power Management ICs
LM393 Dual Differential Comparator Ic In Pakistan
These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.
The LM193 device is characterized for operation from 55C to 125C. The LM293 and LM293A devices are characterized for operation from 25C to 85C. The LM393 and LM393A devices are characterized for operation from 0C to 70C. The LM2903 device is characterized for operation from 40C to 125C.
SKU: D2094
Reviews
There are no reviews yet