CP2102 USB To TTL UART Serial Converter Module For Arduino In Pakistan

CP2102 chip from SiLabs is a single-chip USB to UART bridge IC. This cp2102  USB to serial requires minimal external components.CP2102 can be used to migrate legacy serial port-based devices to USB.

Specification And Features of CP2102 USB To TTL UART Serial Converter Module:

• IC Chip: CP2102
• Stable and reliable chipset CP2102.
• USB specification 2.0 compliant with full-speed 12Mbps.
• Standard USB type A male and TTL 6pin connector.
• 6pins for 3.3V, RST, TXD, RXD, GND & 5V.
• Baud rates: 300 bps to 1.5 Mbps
• Byte receives buffer; 640 bytes transmit buffer.
• Hardware or X-On/X-Off handshaking supported.
• Event character support Line break transmission.
• USB suspend states supported via SUSPEND pins.
• Temperature Range: -40 to +85.
• Size: 42mm X 15mm.
• Weight: 4g

Pinouts of USB To TTL CP2102:

1. TX = Connect to Transmit Pin(TXD) of Microcontroller. This pin is the RX pin of CP2102 on board.
2. RX = Connect to Receive Pin(RXD) of Microcontroller. This pin is the TX pin of CP2102 on board.
3. RST = Normally Unconnected. Reset Pin for CP2102. Initiate a system reset by driving this pin low for at least 15 µs.
4. GND = Should be common to microcontroller ground.
5. 3V3 = Optional output to power external circuit up to 50mA.
6. 5V = Optional output to power external circuit up to 100mA

Package Include:

• 1 x CP2102 USB To TTL UART Serial Converter Module For Arduino In Pakistan