- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
Power Management ICs
Compare
CD4069 Not Gate Hex Inverter IC DIP14 In Pakistan
The CD4069 consists of six inverter circuits and is manufactured using complementary MOS (CMOS) to achieve a wide power supply operating range, low power consumption, high noise immunity, and symmetric controlled rise and fall times. This device is intended for all general-purpose inverter applications inputs are protected from damage due to static discharge by diode clamps to VDD and VSS.
₨85
The CD4069 consists of six inverter circuits and is manufactured using complementary MOS (CMOS) to achieve a wide power supply operating range, low power consumption, high noise immunity, and symmetric controlled rise and fall times. This device is intended for all general-purpose inverter applications inputs are protected from damage due to static discharge by diode clamps to VDD and VSS.
Features:
- Wide supply voltage range: 3.0V to 15V
- High noise immunity: 0.45 VDD Typ.
- Low power TTL compatibility: Fan out of 2 driving 74L or 1 driving 74LS
- Equivalent to MM74C04
Specification:
- Logic Type: INVERTER / NOR / NAND
- Output Current: 6.8mA
- Supply voltage range: 3V to 18V
- Package Type: DIP
- Pin number: 14
- Operating temperature range: -55 ° C to +125 ° C
- Surface Mount Devices: through-hole mounting
Package Include:
- 1x CD4069 Not Gate Hex Inverter IC
Add a review
You must be logged in to post a review
Log In
Related products
- Power Management ICs
LM393 Dual Differential Comparator Ic In Pakistan
These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.
The LM193 device is characterized for operation from 55C to 125C. The LM293 and LM293A devices are characterized for operation from 25C to 85C. The LM393 and LM393A devices are characterized for operation from 0C to 70C. The LM2903 device is characterized for operation from 40C to 125C.
SKU: D2094 - Power Management ICs
L293D IC Dual H-Bridge Motor Driver In Pakistan
The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC, and stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage, and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz. The L293D is assembled in a 16-lead plastic package that has 4 center pins connected together and used for heatsinking.
SKU: D2084
Reviews
There are no reviews yet