- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
AT89C52 is an 8-bit microcontroller and belongs to Atmel’s 8051 families. AT89C52 has 8KB of Flash programmable and erasable read-only memory (PEROM) and 256 bytes of RAM. AT89C52 has an endurance of 1000 Write/Erase cycles which means that it can be erased and programmed to a maximum of 1000 times.
Package Includes:
- 1 x Atmel AT89C52 Microcontroller
Add a review
You must be logged in to post a review
Log In
Related products
- Power Management ICs
ULN2003 IC in Pakistan
The ULN2003 is an array of seven NPN Darlington transistors capable of 500mA, 50V output. ULN2003 features are common-cathode flyback diodes for switching inductive loads. It can come in PDIP, SOIC, SOP, or TSSOP packaging In the same family are ULN2002A, ULN2004A, as well as ULQ2003A and ULQ2004A, designed for different logic input levels.
SKU: D2088 - Power Management ICs
LM393 Dual Differential Comparator Ic In Pakistan
These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.
The LM193 device is characterized for operation from 55C to 125C. The LM293 and LM293A devices are characterized for operation from 25C to 85C. The LM393 and LM393A devices are characterized for operation from 0C to 70C. The LM2903 device is characterized for operation from 40C to 125C.
SKU: D2094 - Power Management ICs
L293D IC Dual H-Bridge Motor Driver In Pakistan
The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC, and stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage, and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz. The L293D is assembled in a 16-lead plastic package that has 4 center pins connected together and used for heatsinking.
SKU: D2084
Reviews
There are no reviews yet