- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
74LS And 74HC Series IC
Compare
7428 Quad Two input NOR in Pakistan
7428 Quad Two input NOR in Pakistan
₨99
7428 Quad Two input NOR in Pakistan
Packing list:
- 1x 7428 Quad Two input NOR
Add a review
You must be logged in to post a review
Log In
Related products
- 74LS And 74HC Series IC
74LS189 64 Bit RAM with 3 State Output IC 74189 74HC189 in Pakistan
Quick View
74LS And 74HC Series IC74LS189 64 Bit RAM with 3 State Output IC 74189 74HC189 in Pakistan
The 74LS189 is a high-speed 64-bit RAM organized as a 16-word by the 4-bit array. Address inputs are buffered to minimize loading and are fully decoded on-chip. The outputs are 3-state and are in the high impedance state whenever the Chip Select (CS) input is HIGH. The outputs are active only in the read mode and the output data is the complement of the stored data.
SKU: D2011 - 74LS And 74HC Series IC
74LS283 in Pakistan
These full adders perform the addition of two 4-bit binary
numbers. The sum (R) outputs are provided for each bit and
the resultant carry (C4) is obtained from the fourth bit.
These adders feature a full internal look ahead across all four
bits. This provides the system designer with a partial lookahead
performance at the economy and reduced package
count of a ripple-carry implementation.SKU: D2018 - 74LS And 74HC Series IC
7404 74LS04 74HC04 Hex Inverter IC in Pakistan
The 7404 is a triple-buffered inverter. It has high noise immunity and the ability to drive 10 LS-TTL loads. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
SKU: D2004 - 74LS And 74HC Series IC
74151 ic in Pakistan
This Data Selector/Multiplexer contains full on-chip decoding to select one-of-eight data sources as a result of a unique three-bit binary code at the Select inputs. Two complementary outputs provide both inverting and non-inverting buffer operation. A Strobe input is provided which, when at the high level, disables all data inputs and forces the Y output to the low state and the W output to the high state. The Select input buffers incorporate internal overlap features to ensure that select input changes do not cause invalid output transients. RoboticsBD
SKU: D2022
Reviews
There are no reviews yet