Electronic Devices And Components
Showing 876–900 of 938 results
- DALY BMS Li-ion And Lifepo4
TDT 4S 2A Active Balancer Equalizer Li-ion LiFePo4 Balance Board In Pakistan
-20%Quick ViewDALY BMS Li-ion And Lifepo4TDT 4S 2A Active Balancer Equalizer Li-ion LiFePo4 Balance Board In Pakistan
The module is adjacent to the differential voltage balance, and the adjacent battery voltage difference reaches 0.1V or more. The internal trigger balance is working until the adjacent battery voltage difference stops within 0.03V. The battery pack has an adjacent differential voltage when charging and discharging. Trigger balance, the battery pack voltage error will be pulled back to the ideal value, reducing battery maintenance costs.
SKU: D1951 - Power Management ICs
TIP127 PNP Medium-Power Complementary Silicon Transistors in Pakistan
The TIP127 is a PNP type Darlington pair transistor. It is manufactured for universal drive amplifications and less velocity swapping submissions. It is existing in TO-220 kind of cascading. Its corresponding NPN transistor is the TIP122.
SKU: D2190 - Operational Amplifier ICs
Tl072 Dual Low-noise Jfet-input General-purpose Operational Amplifier in Pakistan
Quick ViewOperational Amplifier ICsTl072 Dual Low-noise Jfet-input General-purpose Operational Amplifier in Pakistan
The TL07xx JFET-input operational amplifiers incorporate well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low-input bias and offset currents and low offset-voltage temperature coefficient. The low harmonic distortion and low noise make the TL07x series ideally suited for high-fidelity and audio preamplifier applications. The TL071 device has offset pins to support external input offset correction.
SKU: D2646 - Power Management ICs
TL081 DIP-8 TL081CP IC JFET Input Operational Amplifier in Pakistan
TL081 DIP-8 TL081CP IC JFET Input Operational Amplifier JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset-voltage temperature coefficient.
SKU: D2135 - Power Management ICs
TL084 Quad Operational Amplifier IC In Pakistan
The TL084CN JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset-voltage temperature coefficients.
SKU: D2129 - Power Management ICs
TL431 TL431A 431 SMD Voltage Regulator In Pakistan
This is TL431BIDBZR, 215 NEXPERIA Voltage Reference, Precision, Shunt – Adjustable, AEC-Q100 TL431 Series, 2.495V to 36V, SOT-23-3 IC. It belongs to the Three-terminal shunt regulator family with an output voltage range between Vref and 36 V, to be set by two external resistors.
SKU: D2629 - Power Management ICs
TL431 TL431A 431 Voltage Regulator IC In Pakistan
The TL431 is a three-terminal adjustable precision shunt voltage regulator integrated circuit. With the use of an external voltage divider, a TL431 can regulate voltages ranging from 2.5 to 36 V, at currents up 100 mA. The typical initial deviation of reference voltage from the nominal 2.495 V level is measured in millivolts, the maximum worst-case deviation is measured in tens of millivolts.
SKU: D1203 - PWM Control ICs
TL494 TL494C SMD IC PWM Controller IC In Pakistan
The TL494 TL494C SMD IC is a PWM Control Circuit that incorporates all the functions required in the construction of a pulse-width-modulation (PWM) control circuit on a single chip. Designed primarily for power-supply control, this device offers the flexibility to tailor the power-supply control circuitry to a specific application. The error amplifiers exhibit a common-mode voltage range. The dead-time control comparator has a fixed offset that provides approximately 5% dead time. The on-chip oscillator can be bypassed by terminating RT to the reference output and providing a sawtooth input to CT or it can drive the common circuits in synchronous multiple-rail power supplies.
SKU: D451 - PWM Control ICs
TL494 TL494CN PWM Pulse Width Modulation Control IC In Pakistan
The TL494 TL494CN is a PWM Control Circuit that incorporates all the functions required in the construction of a pulse-width-modulation (PWM) control circuit on a single chip. Designed primarily for power-supply control, this device offers the flexibility to tailor the power-supply control circuitry to a specific application. The error amplifiers exhibit a common-mode voltage range. The dead-time control comparator has a fixed offset that provides approximately 5% dead time. The on-chip oscillator can be bypassed by terminating RT to the reference output and providing a sawtooth input to CT or it can drive the common circuits in synchronous multiple-rail power supplies.
SKU: D450 - Battery And Cell Charger
TP4056 Micro USB 3.7V 1A Li-Ion Lithium Battery Charging Module In Pakistan
-10%Quick ViewBattery And Cell ChargerTP4056 Micro USB 3.7V 1A Li-Ion Lithium Battery Charging Module In Pakistan
The TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB is a 3.7V lithium battery charger module that has an onboard Micro USB interface. With Micro-USB onboard connector, you can directly connect to the computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small size and lightweight.
SKU: D328,SB11 - Battery And Cell Charger
TP5000 DC 3.6V And 4.2V 1A LiFePO4 Battery Lithium Battery Charging Board Module In Pakistan
Quick ViewBattery And Cell ChargerTP5000 DC 3.6V And 4.2V 1A LiFePO4 Battery Lithium Battery Charging Board Module In Pakistan
This is a Charging Module for the Lithium Battery based on the TP5000 Battery Charging IC. This module can charge a lithium battery with a current of up to 1A. This module has advanced features like battery temperature protection, reverse battery shutdown, and short circuit protection.
The charging module comes with a dual color led, which is used to denote the charging and full status of the battery. The module also serves as a battery protection board, with a built-in automatic recharge function it will automatically charge the battery when it gets fully discharged.
SKU: D1141,SB41 - Battery And Cell Charger
TP5100 4.2V And 8.4V 2A 1865 Lithium Battery Charging Protection Board Module In Pakistan
Quick ViewBattery And Cell ChargerTP5100 4.2V And 8.4V 2A 1865 Lithium Battery Charging Protection Board Module In Pakistan
TP5100 is a double switch buck 8.4V, single cell 4. 2V lithium battery charge management chip. Its ultra-compact QFN16 package and simple external circuit, make TP5100 ideal for portable equipment and large current charging management applications. Meanwhile, TP5100 built-in input overcurrent, Undervoltage protection, over temperature protection, short circuit protection, battery temperature monitoring, and reverse battery protection. TP5100 has 5V-18V wide input voltage, dual battery trickle charge into pre-charge, constant current, constant voltage three phases, pre-charge current trickle charge current through an external resistor adjustment, and the maximum charge current up to 2A. TP5100 with a frequency of 400kHz switching mode makes it possible to use a smaller outer Suo device and the large current charging still maintains a smaller amount of heat. TP5100 built-in power PMOSFET, anti-intrusion circuit, so no anti-intrusion protection and other external Schottky diode.
SKU: D1140,SB42 - Power Management ICs
TY-610 PLCC IC circuit board extractor tool chip pull up machine clip in Pakistan
Quick ViewPower Management ICsTY-610 PLCC IC circuit board extractor tool chip pull up machine clip in Pakistan
This tool can be used to safely and quickly remove your ICs from their specific sockets. from this tool, your socket pins remain safe from bending and to avoid damage through electrostatic discharge
SKU: D2145 - Battery And Cell Charger
Type C USB TP4056 Charging Module With Protection Circuit In Pakistan
-32%Quick ViewBattery And Cell ChargerType C USB TP4056 Charging Module With Protection Circuit In Pakistan
This TP4056 1A Li-Ion Battery Charging Board Type C with Current Protection is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium-ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished.
SKU: D330,SB13 - PWM Control ICs
UC3843 Current Mode PWM Controller IC DIP-8 Package In Pakistan
The UC3843 IC is a current Mode PWM Controller, meaning it can be used to provide a constant current by varying the output voltage to the load. While building Switch mode supplies with feedback there are two modes of control that are commonly used, one is voltage mode control where the output voltage will keep constant irrespective of the current (CV mode) and the other is current mode control where the output current will be constant (C mode) irrespective of the voltage. The UC3843 can be used to regulate or limit current in applications like SMPS, RPS, DC-DC Converters, Line voltage regulators, etc.
SKU: D463 - PWM Control ICs
UC3843 SMD IC Current Mode PWM Controller IC In Pakistan
The UC3843 SMD IC is a current Mode PWM Controller, meaning it can be used to provide a constant current by varying the output voltage to the load. While building Switch mode supplies with feedback there are two modes of control that are commonly used, one is voltage mode control where the output voltage will keep constant irrespective of the current (CV mode) and the other is current mode control where the output current will be constant (C mode) irrespective of the voltage. The UC3843 can be used to regulate or limit current in applications like SMPS, RPS, DC-DC Converters, Line voltage regulators, etc.
SKU: D464 - Power Management ICs
ULN2003 IC in Pakistan
The ULN2003 is an array of seven NPN Darlington transistors capable of 500mA, 50V output. ULN2003 features are common-cathode flyback diodes for switching inductive loads. It can come in PDIP, SOIC, SOP, or TSSOP packaging In the same family are ULN2002A, ULN2004A, as well as ULQ2003A and ULQ2004A, designed for different logic input levels.
SKU: D2088