Arduino Products
Showing 26–50 of 337 results
- LCD Display Module
2.4 inch Nextion TFT HMI LCD Touchscreen NX3224T024 in Pakistan
2.4 inch Nextion TFT HMI LCD Touchscreen NX3224T024 is a Seamless Human Machine Interface (HMI) solution. 2.4-inch Nextion TFT HMI LCD Touchscreen NX3224T024 that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to the Internet of thing (IoT) or the consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.
SKU: D2279 - LCD Display Module
2.8 inch Nextion TFT HMI LCD Touchscreen NX3224T028 in Pakistan
2.8 inch Nextion TFT HMI LCD Touchscreen NX3224T028 is a Seamless Human Machine Interface (HMI) solution. 2.8 inch Nextion TFT HMI LCD Touchscreen NX3224T028 that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to the Internet of Things (IoT) or the consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.
SKU: D2284 - AC Dimmer
2000W 25A AC50-220V Adjustable AC Dimmer AC Heater Controller In Pakistan
This is a 2000W Thyristor SCR Voltage Regulator Temperature Dimmer for Speed / Light (AC 220V). 2000W Thyristor SCR Voltage Regulator is SCR Dimmer that can be used to control 220V Appliances. It can be used as a light dimmer, fan speed controller, and stove temperature controller. It is easy and simple to use and can control appliances up to 2000W. Just give AC input to the module and connect the appliance at the output of the module, then use the onboard potentiometer knob to adjust and set the required power output from your 220V Device.
SKU: D1164 - LCD Display Module
2004A 20X4 Character Blue Color LCD Display For Arduino in Pakistan
2004A 20X4 Character Blue Color LCD Display is designed to display letters, numbers, symbols, and dot matrix. This 2004A LCD Display can display 4 lines of 20 characters. Support 4-bit and 8-bit data transfer modes. Offers 5×7 matrix + cursor display mode. Providing display data buffer DDRAM, character generator CGROM, and CGRAM. CGRAM can be used to store up to eight 5×8 dot matrix character font data graphic own definition. Provides a rich instruction set: clear display, cursor back to the origin, display on / off, the cursor on / off, display character blink, cursor shift, display shift, and so on.
SKU: D2226 - LCD Display Module
2004A LCD 20×4 Character LCD Green Backlight in Pakistan
This Green 2004A LCD 20X4 Character LCD is a basic 20-character by 4-line display. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED backlight.
SKU: D2228 - Motor Driver
28BYJ48 Stepper Motor With ULN2003 Motor Driver In Pakistan
This 5V DC 28BYJ-48 Stepper Motor is a small, inexpensive, and high-quality geared step motor. The 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a widely popular combination of the stepper motor and stepper driver, because of the stability and reliability of the system. Thia 28BYJ-28 stepper motor is imported from one of our trusted suppliers and the supplier has guaranteed the quality of these compact stepper motors. The motor has a reduction ratio of 64:1, so it offers a decent torque for its size at speeds of about 15 RPM. It is a unipolar stepper motor that has 5-wires.
SKU: D403,B73 - Motor Driver
2DM542 Stepper Motor Driver In Pakistan
Just Motion 2DM542 is a 4.2 Ampare stepper motor driver with options for micro stepping in the range from 400 to 25600 steps/rev. 2DM542 Current setting can be set from 1A to 4.2A. An automatic parameter tuning is integrated inside this driver, this can help the driver automatically adjust to the best operation parameters to maximize the performance of different stepper motors.
SKU: D2481 - Motor Driver
2DM860H 2 phase NEMA23 NEMA34 stepper motor driver In Pakistan
2DM860H 2phase NEMA23 NEMA34 stepper motor driver IN PAKISTAN 2DM860H is the newest digital stepper motor driver, using the latest 32-bit DSP control technology, the user can set any segment within 25600 and multi-range current value within the rated current, with built-in microtechnology, 2DM860H driver greatly improved stability and reduced noise under subdivision. Integrating automatic parameter tuning function inside. it also can adjust the optimal operating parameters automatically for different motors to maximize the
SKU: D2482 - LCD Display Module
3.2 inch Nextion TFT HMI LCD Touchscreen NX4024T032 in Pakistan
3.2-inch Nextion TFT HMI LCD Touchscreen NX8048K050 is a Seamless Human Machine Interface (HMI) solution. 3.2-inch Nextion TFT HMI LCD Touchscreen NX8048K050 that provides a control and visualization interface between a human and a process, machine, application, or appliance. Nextion is mainly applied to the Internet of Things (IoT) or the consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.
SKU: D2283 - LCD Display Module
3.5 inch Nextion TFT HMI LCD Touchscreen NX4832T035 in Pakistan
3.5 inch Nextion TFT HMI LCD Touchscreen NX4832T035 is a Seamless Human Machine Interface (HMI) solution. 3.5 inch Nextion TFT HMI LCD Touchscreen NX4832T035 that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to the Internet of Things (IoT) or the consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tubes.
SKU: D2296 - LCD Display Module
30A 12V/24V LCD Solar Panel Regulator Generator Charge Charging Controller CM3024Z in Pakistan
Quick View
LCD Display Module30A 12V/24V LCD Solar Panel Regulator Generator Charge Charging Controller CM3024Z in Pakistan
12V/24V automatic identification charger, lead-acid battery (lithium battery, Ni-MH battery is not available) solar charge controller, only supports photovoltaic solar panels as a charging source. When the charging battery is 12V, choose the 17-22V solar panel; when the charging battery is 24V, choose the 30-42V solar panel for charging. Charging with mismatched voltage will damage the controller. Charging and discharge status display, cumulative power generation and discharge query, temperature display. Light control + delay control, adjustable charge, and discharge parameters, with power-off memory function. Built-in over the current, short circuit, open circuit, reverse connection, protection; self-recovery protection, does not damage the controller and extends the service life.
SKU: D2243 - Current Sensor Module
30A range Current Sensor Module ACS712 in Pakistan
The ACS712 30A Range Current Sensor Module / Hall Sensor device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage.
SKU: D2370 - Arduino Products
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model in Pakistan
Quick ViewArduino Products3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model in Pakistan
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model is mainly designed for the purpose of using a Pololu stepper-driven board (similar to 4988 driven board). RAMPS can only work when connected to its motherboard Mega 2560 and 4988/DRV8825. Owning to its stability in operation and great compatibility with most 3D printers (all RepRap-model such as purse i2 and i3). The combination of Ramps1.4 + MEGA2560 + A4988/DRV8825 is becoming a mainstream DIY 3D printer control board. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept at the top of the stack. Ramp boards are the heart of most DIY 3D printers on the market and a nice clean compact way to integrate all the systems into a compact enclosure mountable format.
SKU: D2507 - Motor Driver
4 Axis 6 Axis CNC Breakout Board Stepper Motor Driver MACH3V2.1-L Adapter Controller In Pakistan
Quick ViewMotor Driver4 Axis 6 Axis CNC Breakout Board Stepper Motor Driver MACH3V2.1-L Adapter Controller In Pakistan
4 Axis 6 Axis CNC Breakout Board Stepper Motor Driver is used to run the signal processing of the host computer ( LPT port ), with MACH3 CNC system software, and the peripheral machine dynamic electrical. It is suitable for CNC engraving machines, CNC lathes, CNC plasma cutting machines, laser engraving machines, CNC milling machines, machining centers, and other machine tools. With the host computer and the MACH3 series software, it can be the most cost-effective CNC system. It is used to run the signal processing of the host computer ( LPT port ), with MACH3 CNC system software, and the peripheral machine dynamic electrical. It is suitable for CNC engraving machines, CNC lathes, CNC plasma cutting machines, laser engraving machines, CNC milling machines, machining centers, and other machine tools. With the host computer and the MACH3 series software, it can be the most cost-effective CNC system.
SKU: D2489 - Arduino Robot Kits
4 DOF Acrylic Unassembled DIY Robot Arm Kit Servo For Arduino In Pakistan
Quick ViewArduino Robot Kits4 DOF Acrylic Unassembled DIY Robot Arm Kit Servo For Arduino In Pakistan
ABB’s industrial robot prototype mini four degrees of freedom mechanical gloves member, use Arduino as a master, driving four 9g servos motion simulation of industrial robot operation. Is a rare perfect toy, whether it is used to study the mechanical hand or used as decoration or as a gift for children, is an excellent choice.
SKU: D1125 - LCD Display Module
4.3 inch Nextion TFT HMI LCD Touchscreen NX4827T043 in Pakistan
4.3-inch Nextion TFT HMI LCD Touchscreen NX4827T043 is a Seamless Human Machine Interface (HMI) solution. 4.3-inch Nextion TFT HMI LCD Touchscreen NX4827T043 that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to the Internet of Things (IoT) or the consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.
SKU: D2281 - Arduino Products, SMPS Switch Mode Power Supply
48V 5A 250W Switching Power Supply SMPS In Pakistan
Quick ViewArduino Products, SMPS Switch Mode Power Supply48V 5A 250W Switching Power Supply SMPS In Pakistan
A 48V 5A switched-mode power supply (SMPS) is an electronic circuit that converts power using switching devices that are turned on and off at high frequencies, and storage components such as inductors or capacitors to supply power when the switching device is in its non-conduction state. The latest international Switching DC Power Supply programs High performance, low power consumption, low-cost Built-in overload, short circuit protection circuit Switching Transformer 5A design according to the characteristics of the LED, Built-in LED power indicator, 100% full of aging test, the quality is more secure.
SKU: D440 - Arduino Robot Kits
4WD 4 Wheel DIY Arduino Smart Robot Car Kit For Students Project In Pakistan
Quick ViewArduino Robot Kits4WD 4 Wheel DIY Arduino Smart Robot Car Kit For Students Project In Pakistan
Our unique Arduino robot kit is designed to make it quick and enjoyable to learn. You won’t find it anywhere else, from a simple pile of parts to a highly functional and flexible robotic car with multiple functions. Good for any level of skill, whether you’re a pro or a beginner. The all-in-one robotics kit is designed for all DIY robotics projects with one solution.
SKU: D1278 - Arduino Robot Kits
4WD 4 Wheel DIY Arduino Smart Robot Car Kit For Students Project In Pakistan
Quick ViewArduino Robot Kits4WD 4 Wheel DIY Arduino Smart Robot Car Kit For Students Project In Pakistan
Our unique Arduino robot kit is designed to make it quick and enjoyable to learn. You won’t find it anywhere else, from a simple pile of parts to a highly functional and flexible robotic car with multiple functions. Good for any level of skill, whether you’re a pro or a beginner. The all-in-one robotics kit is designed for all DIY robotics projects with one solution.
SKU: D1279
