- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
7473 FLIP FLOP JK in Pakistan
Packing list:
- 1x 7473 FLIP FLOP JK
Add a review
You must be logged in to post a review
Log In
Related products
- 74LS And 74HC Series IC
74LS138 – 3 to 8 Decoder De-Multiplexer IC in Pakistan
The 74LS138 is a 3:8 Decoder IC that is commonly used in decoding or de-multiplexing circuits for memory decoding or data routing purposes. It is designed for high-speed operations and has three enable pins to make it easier to cascade with other ICs. The device decodes 1-of-8 lines, set by x3 binary select inputs & three enable inputs. The LS138 can be used as an 8- output demultiplexer by using one active LOW Enable input as data input & the other Enable inputs as strobes. The IC has an operating voltage from 1.0V to 5.5V with a low power consumption of 32mW. The propagation delay is around 21nS.
SKU: D2020 - 74LS And 74HC Series IC
7448 BCD To 7 Segment Decoder Driver IC 74LS48 SN74LS48N 74HC48 in Pakistan
Quick View
74LS And 74HC Series IC7448 BCD To 7 Segment Decoder Driver IC 74LS48 SN74LS48N 74HC48 in Pakistan
The 74LS48 features active-high outputs for driving lamp buffers or common-cathode LEDs. They have full ripple-blanking input/output controls and a lamp test input. Display patterns for BCD input count above 9 are unique symbols to authenticate input conditions. Their circuits incorporate automatic leading and/or trailing-edge zero-blanking control (RBI\ and RBO\). Lamp test (LT\) of these types may be performed at any time when the BI\/RBO\ node is at a high level. They contain an overriding blanking input (BI\), which can be used to control the lamp intensity by pulsing or to inhibit the outputs. Inputs and outputs are entirely compatible for use with TTL logic outputs.
SKU: D2010 - 74LS And 74HC Series IC
74LS32 74-LS32 74HC32 7432 Quad 2 Input OR Gate DIP IC SN74CH32N in Pakistan
Quick View74LS And 74HC Series IC74LS32 74-LS32 74HC32 7432 Quad 2 Input OR Gate DIP IC SN74CH32N in Pakistan
This device contains four independent gates each of which performs the logic OR function. The 74LS32 is a 14-Pin Quad 2-Input OR Gate IC. The 74LS32 provides four independent 2-input OR gates with standard push-pull outputs. Featured by Sharvi Electronics The device is designed for operation with a power supply range of 2.0V to 6.0V. Inputs include clamp diodes. This enables the use of current-limiting resistors to interface inputs to voltages in excess of VCC.
SKU: D2000 - 74LS And 74HC Series IC
74151 ic in Pakistan
This Data Selector/Multiplexer contains full on-chip decoding to select one-of-eight data sources as a result of a unique three-bit binary code at the Select inputs. Two complementary outputs provide both inverting and non-inverting buffer operation. A Strobe input is provided which, when at the high level, disables all data inputs and forces the Y output to the low state and the W output to the high state. The Select input buffers incorporate internal overlap features to ensure that select input changes do not cause invalid output transients. RoboticsBD
SKU: D2022
Reviews
There are no reviews yet