TP4056 Micro USB 3.7V 1A Li-Ion Lithium Battery Charging Module In Pakistan

The TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB is a 3.7V lithium battery charger module that has an onboard Micro USB interface. With Micro-USB onboard connector, you can directly connect to the computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small size and lightweight.

SKU: D328,SB11

42

0 People watching this product now!

Description

The TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB is a 3.7V lithium battery charger module that has an onboard Micro USB interface. With Micro-USB onboard connector, you can directly connect to a computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small in size and lightweight.

Specification of TP4056 Micro USB 3.7V 1A Li-Ion Lithium Battery Charging Module:

  • Model:TP4056/TC4056
  • Charging accuracy (%):1.5
  • Charging method: Linear
  • Input Voltage (V):4.5-5.5
  • Full Charge Voltage (V):4.2
  • Charge Current: 1A
  • Operating Temperature (°C):-10 to 85
  • Rated Power (W):4.2
  • Charging indicator: LED indicators for charging and full charging.
  • Height (mm):4
  • Length (mm):24
  • Width (mm):18

Features of TP4056 Micro USB 3.7V 1A Li-Ion Lithium Battery Charging Module For 18650:

  1. Charging indicator: LED indicators for charging and full charging.
  2. Charge Current: 1A (default), modify the onboard resistor to adjust the charging current according to the table below.
  3. Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy.
  4. Fully machinery automated processing, all patch parts manufacturing.
  5. The charging current can be adjusted by just changing the circuit board’s fixed resistors. It can change the output to 100mA-1000mA, very conveniently.

Note: 

  • This breakout board does not have overcurrent protection.
  • Connect Ampere meter in series with 5V input end.
  • The charging current is best to be 0.37 times the battery capacity,
  • Charging wire can’t be too thin or too long while interfacing.
  • Make sure the board has good contact with the battery.
  • Chip at work about 60 degrees fever is normal.
  • Input reverse connection has no effect on the chip. Rather the output (battery’s) reverse connection will burn out the chip.

TP4056 Micro USB 5V 1A Li-Ion Lithium Battery Charging Module In Pakistan

 

 

 

TP4056 Micro USB 5V 1A Li-Ion Lithium Battery Charging Module In Pakistan

 

 

 

TP4056 Micro USB 5V 1A Li-Ion Lithium Battery Charging Module In Pakistan

 

 

 

TP4056 Micro USB 5V 1A Li-Ion Lithium Battery Charging Module In Pakistan

 

Package Include:

  • 1 x TP4056 Micro USB 3.7V 1A Li-Ion Lithium Battery Charging Module In Pakistan

 

Customer Reviews

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In