!معزز کسٹمر ویب سائٹ پر آوڈر پلیس کرنے کے بعد ہمیں کال یا واٹس ایپ 03021421492 پر اپنی اوڈر آئی ڈی لازمی سینڈ کریں تاکہ آپ کا آوڈر جلد سے جلد پروسیس کیا جا سکے. شکریہ

Dark Light

TDT 8S 24V 100A BMS TDT 9026 8S 100A BMS LiFePO4 Battery

The TDT LiFePO4 LFP 8S 24V 100A Battery Management System (BMS) is a sophisticated solution designed to ensure the safe and efficient operation of lithium iron phosphate (LiFePO4) batteries in an 8-cell series configuration. TDT BMS TDT9026 LiFePO4 LFP 8S 24V 100A BMS Common Port.

Compare

9,000

The TDT LiFePO4 LFP 8S 24V 100A Battery Management System (BMS) is a sophisticated solution designed to ensure the safe and efficient operation of lithium iron phosphate (LiFePO4) batteries in an 8-cell series configuration. TDT 8S 24V 100A BMS TDT 9026 8S 100A BMS LiFePO4 Battery.

TDT-9026 is a hardware BMS for 24V battery packs supporting parallel connection. which can be applied to lithium-ion, lithium-polymer, and other lithium batteries with different chemical properties. Lithium iron phosphate, etc. The protective board has a strong load capacity, and the maximum continuous discharge current can reach 200A

Specification of TDT 8S 24V 100A BMS TDT 9026 8S 100A BMS:

  1. Model Name:  TDT 9026
  2. Dimensions: L188*W70*T10mm MAX
  3. Overcharge Detection Voltage: 3.65±0.05V
  4. Overcharge Release Voltage: 3.50±0.1V
  5. Overdischarge Detection Voltage: 2.3±0.1V
  6. Overdischarge Release Voltage: 2.70±0.1V
  7. Overcurrent: 400A
  8. Overcurrent cut-off time: 200~600 ms
  9. Short Circuit Prevention: 100 ~ 350 microseconds
  10. Recovery from Short Circuit: Disconnect the load
  11. Charge / Discharge Temperature Protection: 75±10℃
  12. Product’s energy consumption: Maximum 80 uA
  13. Maximum Continuous Charge Current: 100A
  14. Maximum Continuous Discharge Current: 100A
  15. Balance Voltage: 3.46V±0.05V
  16. Balance Current: 40- 60mA
  17. B+ (Battery Positive) Connection: A cable capable of carrying 100A from the battery. For Load + and Charge +.
  18. B- (Battery Negative) Connection: 3 PAD Screw
  19. P- (Charge/Discharge Negative) Connection: 3 PAD Screw
    Contact: Red and black wires come out for on-off. By short-circuiting them, the BMS becomes open. If you separate it, it becomes closed. You can connect it to a button, or if you are not going to use it, you can short-circuit it and shorten it.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Package Includes:

  • 1 x TDT 8S 24V 100A BMS TDT 9026 8S 100A BMS LiFePO4 Battery
SKU: D2974 Category:

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In

SHOPPING CART

close
error: Content is protected !!

Select at least 2 products
to compare