- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
T74LS05B1 T74LS 05B1 S05B1 AND Gate IC in Pakistan
T74LS05B1 T74LS 05B1 S05B1 AND Gate IC in Pakistan
T74LS05B1 T74LS 05B1 S05B1 AND Gate IC in Pakistan
Packing list:
- 1x T74LS05B1 T74LS 05B1 S05B1 AND Gate IC
Related products
- 74LS And 74HC Series IC
7404 74LS04 74HC04 Hex Inverter IC in Pakistan
0 out of 5(0)The 7404 is a triple-buffered inverter. It has high noise immunity and the ability to drive 10 LS-TTL loads. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
SKU: D2004 - 74LS And 74HC Series IC
74LS283 in Pakistan
0 out of 5(0)These full adders perform the addition of two 4-bit binary
numbers. The sum (R) outputs are provided for each bit and
the resultant carry (C4) is obtained from the fourth bit.
These adders feature a full internal look ahead across all four
bits. This provides the system designer with a partial lookahead
performance at the economy and reduced package
count of a ripple-carry implementation.SKU: D2018 - 74LS And 74HC Series IC
74193 Synchronous 4 Bit Binary Counter DIP IC SN74LS193N 74HC193 in Pakistan
Quick View74LS And 74HC Series IC74193 Synchronous 4 Bit Binary Counter DIP IC SN74LS193N 74HC193 in Pakistan
0 out of 5(0)This circuit is a synchronous up/down 4-bit binary counter. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change together when so instructed by the steering logic. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple clock) counters. The outputs of the four master-slave flip-flops are triggered by a low-to-high level transition of either count (clock) input. The direction of counting is determined by which count input is pulsed while the other count input is held high. The counter is fully programmable; that is, each output may be preset to either level by entering the desired data at the inputs while the load input is low. The output will change independently of the count pulses.
SKU: D2015 - 74LS And 74HC Series IC
74HC165 Parallel To Serial 8 Bit Shift Register IC in Pakistan
0 out of 5(0)The 74HC165 is a high-speed Si-gate CMOS device and is pin-compatible with low-power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC165 are 8-bit parallel-load or serial-in shift registers with complementary serial outputs (Q7 and Q7) available from the last stage. When the parallel load (PL) input is LOW, parallel data from the D0 to D7 inputs are loaded into the register asynchronously. When PL is HIGH, data enters the register serially at the Ds input and shifts one place to the right (Q0 –> Q1 –> Q2, etc.) with each positive-going clock transition. This feature allows parallel-to-serial converter expansion by tying the Q7 output to the DS input of the succeeding stage. The clock input is a gated-OR structure that allows one input to be used as an active LOW clock enable (CE) input. The pin assignment for the CP and CE inputs is arbitrary and can be reversed for layout convenience. The LOW-to-HIGH transition of input CE should only take place while CP is HIGH for predictable operation. Either the CP or the CE should be HIGH before the LOW-to-HIGH transition of PL to prevent shifting the data when PL is activated.
SKU: D2016
Reviews
There are no reviews yet