Dark Light

NRF24L01 2.4GHz Antenna Wireless Transceiver Module In Pakistan

This is M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low-power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub μA power-down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery life when running on coin cells or AA/AAA batteries. These RF modules are very popular among Arduino tinkerers. The nRF24L01 is used on a wide variety of applications that require wireless control. They are transceivers which means that each module can transmit and receive data. M177 NRF24L01+ 2.4GHz Antenna Wireless Transceiver Module can be used with Arduino, Mbed, ARM, or any other MCU.

Compare

210

This is M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low-power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub μA power-down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery life when running on coin cells or AA/AAA batteries.

Specification of NRF24L01 2.4GHz Antenna Wireless Transceiver Module:

  • Model: NRF24L01
  • Maximum output power: +20dBm.
  • Emission mode current(peak): 115mA.
  • Receive Mode Current(peak): 45mA.
  • Power-down mode current: 4.2uA.
  • Sensitivity 2Mbps mode in received: -92dBm.
  • Sensitivity 1Mbps mode in received: -95dBm.
  • PA gain: 20DbLNA gain: 10Db
  • Sensitivity 250kbps mode in received: -104dBm.
  • Operating Range: 1Km
  • LNA Noise figure: 2.6Db.
  • Antenna Gain (peak): 2Dbi.
  • 2MB rate (Open area): 520m.
  • 1MB rate (Open area): 750m.
  • 250Kb rate (Open area): 1100m.
  • Interface: SPI
  • Input Voltage (V): 1.9 to 3.6
  • Length (mm): 28
  • Width (mm): 15
  • Height (mm): 12
  • Weight (gm):2

Features of NRF24L01 2.4GHz Antenna Wireless Transceiver Module For Arduino:

  1. Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
  2. Particularly suitable for industrial control applications.
  3. 125 Channels, Multi-point communication, and frequency hopping to meet the communication needs
  4. Built-in hardware CRC error detection, Multipoint communication address control.
  5. Low-power 1.9 ~ 3.6V, only 1uA on Power-down mode
  6. Built-in 2.4Ghz antenna
  7. Available software to set the address only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
  8. Built-in voltage regulator
  9. Standard DIP Pitch Interface for embedded applications.

NRF24L01 2.4GHz Antenna Wireless Transceiver Module In Pakistan

NRF24L01 2.4GHz Antenna Wireless Transceiver Module In Pakistan

NRF24L01 2.4GHz Antenna Wireless Transceiver Module In Pakistan

NRF24L01 2.4GHz Antenna Wireless Transceiver Module In Pakistan

NRF24L01 2.4GHz Antenna Wireless Transceiver Module In Pakistan

NRF24L01 2.4GHz Antenna Wireless Transceiver Module In Pakistan

NRF24L01 2.4GHz Antenna Wireless Transceiver Module In Pakistan

 

Package Include:

  • 1 x NRF24L01 2.4GHz Antenna Wireless Transceiver Module In Pakistan
SKU: D380,SB86 Category:

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In

SHOPPING CART

close
error: Content is protected !!
X