- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
MAC97A6 TO-92 Triac 1A Transistor in Pakistan
Package Includes:
- 1X MAC97A6 TO-92 Triac 1A Transistor in Pakistan
Related products
- Transistor
BT136 BTA136 TRIAC 4A 600V Thyristor In Pakistan
0 out of 5(0)The BT136 is TRIAC with 4A maximum terminal current. The gate threshold voltage of the BT136 is also very less so can be driven by digital circuits. Since TRIACs are bi-directional switching devices they are commonly used for switching AC applications. So if you looking to switch control (dim, speed control) to an AC load that consumes less than 6A with a digital device like a microcontroller or microprocessor then BT136 might be the right for you.
SKU: D1251 - Transistor
2SC945 C945 50V 0.15A Bipolar NPN Transistor In Pakistan
0 out of 5(0)The bipolar NPN Transistor is an age-old Japanese Bipolar audio frequency NPN transistor. 2SC945 50V NPN transistor has a decent gain value (have) of maximum 700 and is highly linear. Hence this bipolar transistor was widely used in amplifier applications for pre-amplifying purposes, in high-frequency circuits. This NPN junction transistor is also used as an oscillator with its complementary A733 PNP transistor.
SKU: D1092 - Transistor
S8050 NPN Amplifier General Purpose Transistor 20V 700mA In Pakistan
0 out of 5(0)S8050 is an NPN transistor hence the collector and emitter will be left open (Reverse biased) when the base pin is held at the ground and will be closed (Forward biased) when a signal is provided to the base pin. It has a maximum gain value of 400; this value determines the amplification capacity of the transistor normally S8050. Since it is very high it is normally used for amplification purposes. However, at a normal operating collector current, the typical value of gain will be 110. The maximum amount of current that could flow through the Collector pin is 700mA, hence we cannot drive loads that consume more than 700mA using this transistor. To bias a transistor we have to supply current to the base pin, this current (IB) should be limited to 5mA.
SKU: D458
Reviews
There are no reviews yet