Dark Light

GY-NEO6MV2 GPS Module U Blox Neo6m V2 In Pakistan

If you are wandering to navigate the distance with a drone then this GPS Module is needed for you. GPS drones are equipped with a GPS module that allows them to know their location relative to a network of orbiting satellites. Connecting to signals from these satellites allows the drone to perform functions such as position hold, autonomous flight, return to home, and waypoint navigation.

This is a complete GPS module that is based on the NEO 6M GPS. This unit uses the latest technology to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.

The GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-center software for configuring the GPS and changing the settings and much more. It is really good software (see link below).

Compare

1,100

If you are wandering to navigate the distance with a drone then this GPS Module is needed for you. GPS drones are equipped with a GPS module that allows them to know their location relative to a network of orbiting satellites. Connecting to signals from these satellites allows the drone to perform functions such as position hold, autonomous flight, return to home, and waypoint navigation.

This is a complete GPS module that is based on the NEO 6M GPS. This unit uses the latest technology to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.

The GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-center software for configuring the GPS and changing the settings and much more. It is really good software (see link below).

Specification of U BLOX GY-NEO6MV2 GPS Module:

  • Model: Ublox NEO-6M
  • Receiver Type:50 Channels GPS L1 frequency, C/A Code / SBAS: WAAS, EGNOS, MSAS
  • Input Supply Voltage (VDC): 2.7 – 6V
  • Main Chip: NEO-6
  • Sensitivity (dBm):-160-156 Cold Start (without aiding): -147 dBm / Tracking & Navigation: -161 dBm
  • Navigation Update Rate:5Hz
  • Position Accuracy (Meter):2
  • Operating Temperature Range (°C):-24 to 84
  • Avg Cold Start Time (s):27
  • Warm Start Time (s):27
  • Maximum Speed:500 M/s

Feature of U Blox Neo6m V2 GPS Module:

  1. 5Hz position update rate
  2. Operating temperature range: -40 TO 85°CUART TTL socket
  3. EEPROM to save configuration settings
  4. Rechargeable battery for Backup
  5. The cold start time of 38 s and Hot start time of 1 s
  6. Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
  7. SuperSense ® Indoor GPS: -162 dBm tracking sensitivity
  8. Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
  9. Separated 18X18mm GPS antenna

GPS Module NEO6MV2  U Blox Neo6m V2 In Pakistan

GPS Module NEO6MV2  U Blox Neo6m V2 In Pakistan

GPS Module NEO6MV2  U Blox Neo6m V2 In Pakistan

GPS Module NEO6MV2  U Blox Neo6m V2 In Pakistan

GPS Module NEO6MV2  U Blox Neo6m V2 In Pakistan

GPS Module NEO6MV2  U Blox Neo6m V2 In Pakistan

 

Package Include:

  • 1 x GY-NEO6MV2 GPS Module U Blox Neo6m V2 In Pakistan
SKU: D292 Category:

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In

SHOPPING CART

close
error: Content is protected !!
X