DALY BMS LiFePo4 4S 12V 60A For Lithium Iron Phosphate Battery Pack in Pakistan

This is a 4S fixed configuration basically it cannot be used for any other battery pack configurations. Because it is only a lithium iron phosphate battery management system only. As a result that they cannot be used for Li-Ion, Li-Metal or LTO batteries.It is strictly for LiFePo4 battery packs only.

Specification of DALY BMS LiFePo4 4S 12V 60A For Lithium Iron Phosphate Battery Pack:

1. Model: 4S 12V 60A
2. Battery Type: LiFePo4.
3. Continue discharge current: 60A
4. Peak current:180±30A
5. main circuit inner resistance: ≤ 20mΩ
6. Charge Voltage: S*3.75V
7. Charge Current: 30A
8. Over-charge detect  voltage: 3.75 ± 0.05V
9. Over-charge protection delay:   1S
10. Over-charge release voltage: 3.65 ± 0.05V
11. Balance detect voltage: 3.5 V
12. Balance release voltage: 3.5 V
13. Balance current: 30 ± 5 mA
14. Over discharge detect voltage: 2.7 ± 0.1 V
15. Over discharge detect voltage: 2.7 ± 0.1 V
16. Over discharge detect delay: 1S
17. Over discharge release voltage: 2.7 ± 0.1 V
18. Over Current detect delay: 1mS
19. Over Current detect voltage: Off  load
20. Short circuit protection condition: Short circuit external load
21. Short circuit detect delay: 250µS
22. Short circuit protection  relay condition: Off load
23. Temp protection: Charge  <-5  ͦ C  or >50  ͦ C / discharge < 70  ͦ C
24. working current: 100µA
25. Sleeping current (when in discharge): 20µA
26.  Working temp range: -20   ̴ 70 ͦc
27. Sleeping temp range: -40   ̴ 80 ͦc
28. Wiring Diagram: Wiring-Diagram