CP2102 chip from SiLabs is a single-chip USB to UART bridge IC. This cp2102 USB to serial requires minimal external components.CP2102 can be used to migrate legacy serial port-based devices to USB.
Specification And Features of CP2102 USB To TTL UART Serial Converter Module:
- IC Chip: CP2102
- Stable and reliable chipset CP2102.
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 6pin connector.
- 6pins for 3.3V, RST, TXD, RXD, GND & 5V.
- Baud rates: 300 bps to 1.5 Mbps
- Byte receives buffer; 640 bytes transmit buffer.
- Hardware or X-On/X-Off handshaking supported.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Temperature Range: -40 to +85.
- Size: 42mm X 15mm.
- Weight: 4g
Pinouts of USB To TTL CP2102:
- TX = Connect to Transmit Pin(TXD) of Microcontroller. This pin is the RX pin of CP2102 on board.
- RX = Connect to Receive Pin(RXD) of Microcontroller. This pin is the TX pin of CP2102 on board.
- RST = Normally Unconnected. Reset Pin for CP2102. Initiate a system reset by driving this pin low for at least 15 µs.
- GND = Should be common to microcontroller ground.
- 3V3 = Optional output to power external circuit up to 50mA.
- 5V = Optional output to power external circuit up to 100mA
Package Include:
- 1 x CP2102 USB To TTL UART Serial Converter Module For Arduino In Pakistan
Reviews
There are no reviews yet