Aluminum Metal Desoldering Pump Solder Sucker In Pakistan

A desoldering pump, colloquially known as a solder sucker, is a manually-operated device that is used to remove solder from a printed circuit board. The solder sucker has an aluminum-magnesium alloy frame and a high-pressure vacuum that can remove solder from a printed circuit board effectively.

Specification & Feature of Aluminum Metal Desoldering Pump Solder Sucker:

• Range of temperature regulation: 1℃
• Scope of application: Tin removal
• Net weight: approx. 40g
• Length: approx. 200mm/7.87”
• Material: Aluminum/Metal/Plastic
• Maximum suction: 30
• Color: Blue/Gold

Operation Manual Aluminum Metallic Desoldering Pump Solder Sucker:

1. Put the tin suctioner piston downward pressure to get stuck.
2. Heating solder joints to solder melting with electric soldering iron.
3. Remove the iron and quickly put the tin suctioner resistance paste solder, solder sucker and press the button.
4.  If It is not clean at one time and can be repeated many times.

Using skills Powerful Suction Desoldering pump:

1. To ensure good solder sucker piston seal. Before electricity, with your fingers to plug hole solder sucker head, solder sucker head to press the button if the piston is not easy to pop into place, that the seal is good.
2. The aperture tin suction heads are of different sizes, select the appropriate specifications.
3. Tin suction head wears, should replace the new one.
4. Solder paste is dipped in a little bit of rosin before contact with solder to improve solder fluidity.
5. Head contact pads are slightly longer, when the solder melts, the solder joint pin is the center, then hand out in a clockwise direction to draw a circle, and then press the button tin suction.

Note:

• Please allow 1-3 cm differs due to manual measurement.
• Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.

Package Includes:

• 1 x Aluminum Metal Desoldering Pump Solder Sucker In Pakistan