A4988 Stepper Motor Driver Module For Arduino In Pakistan
The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with a built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). A4988 driver Stepper Motor Driver includes a fixed off-time current regulator, the regulator can be in slow or mixed decay mode. The converter is the key to the easy implementation of the A4988. There are no phase sequence tables, the high-frequency control interface programming, etc. The application of the A4988 interface is very suitable for a complex microprocessor that is not available or overloaded. In the stepping operation, the chopping control in the A4988 automatically selects the current decay mode (slow or mixed). The mix decay current control scheme can reduce the audible motor noise, increase step accuracy, and reduce power consumption. Provide internal synchronous rectification control circuitry, in order to improve the pulse width modulation (PWM) power consumption during operation.
₨250
The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with a built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). A4988 driver Stepper Motor Driver includes a fixed off-time current regulator, the regulator can be in slow or mixed decay mode. The converter is the key to the easy implementation of the A4988.
Specification of A4988 Stepper Motor Driver Module For Arduino:
- Model: A4988
- Input Supply Voltage (VDC):8 ~ 35
- Operating Current (A):1.0A(No Heatsink ), 2.0A (with Heat-Sinking)
- Logic Input (V):3 ~ 5.5
- Five-Step Model: full, 1/2, 1/4, 1/8, and 1/16.
Feature of Stepper Motor Driver A4988 Module For Arduino:
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8, and 1/16.
Package Include:
- 1 x A4988 Stepper Motor Driver Module For Arduino In Pakistan
Related products
- Motor Driver
Mini Motor Drive Shield Expansion Board L293D Module In Pakistan
Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560 is a Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC and stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz.
SKU: D387,B75 - Motor Driver
L298N Dual H Bridge Motor Driver Module In Pakistan
This L298N Based Motor Driver Module is a high-power motor driver perfect for driving DC Motors . H Bridge Driver Module uses the popular L298 motor driver IC and has the onboard 5V regulator which it can supply to an external circuit. It can control up to 4 DC motors, or 2 DC motors with directional and speed control. This Motor Driver is perfect for robotics and mechatronics projects and perfect for controlling motors from microcontrollers, switches, relays, etc. Perfect for driving DC for micro mouse, line-following robots, robot arms, etc. An H-Bridge is a circuit that can drive a current in either polarity and be controlled by Pulse Width Modulation (PWM). Pulse Width Modulation is a means of controlling the duration of an electronic pulse. In motors try to imagine the brush as a water wheel and electrons as the flowing droplets of water. The voltage would be the water flowing over the wheel at a constant rate, the more water flowing the higher the voltage. Motors are rated at certain voltages and can be damaged if the voltage is applied too heavily or if it is dropped quickly to slow the motor down. Thus PWM. Take the water wheel analogy and think of the water hitting it in pulses but at a constant flow. The longer the pulses the faster the wheel will turn, the shorter the pulses, the slower the water wheel will turn. Motors will last much longer and be more reliable if controlled through PWM.
SKU: D302 - Motor Driver
L293D Motor Driver Shield Expansion Board For Arduino In Pakistan
The L293D Motor Driver/Servo Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project. This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motors or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10. The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction of the motor drivers. The output enables the L293D is directly connected to the PWM outputs of the Arduino.
SKU: D388,B75 - Motor Driver
MX1508 Mini Dual Channel 1.5A DC Motor Driver Module Mini L298N Replacement in Pakistan
-17%Quick View
Motor DriverMX1508 Mini Dual Channel 1.5A DC Motor Driver Module Mini L298N Replacement in Pakistan
MX1508 is a 1.5A Mini Dual Channel DC Motor Driver Module an alternative of L298 or L298N PWM Speed Controller is a newly designed H Bridge motor driver module for DIY robotics projects. This Mini Dual Channel DC Motor Driver Module MX1508 PWM Speed Controller module is ideal for use in battery-powered smart cars, toy cars, and robots. Supply voltage 2V ~ 10V can drive two DC motors or 4-wire 2-phase stepper motors and can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed. Each PWM Speed Controller Board can provide a continuous current of 1.5A, a peak current of up to 2.5A, thermal protection, and can be automatically restored.
SKU: D2457 - Motor Driver
28BYJ48 Stepper Motor With ULN2003 Motor Driver In Pakistan
This 5V DC 28BYJ-48 Stepper Motor is a small, inexpensive, and high-quality geared step motor. The 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a widely popular combination of the stepper motor and stepper driver, because of the stability and reliability of the system. Thia 28BYJ-28 stepper motor is imported from one of our trusted suppliers and the supplier has guaranteed the quality of these compact stepper motors. The motor has a reduction ratio of 64:1, so it offers a decent torque for its size at speeds of about 15 RPM. It is a unipolar stepper motor that has 5-wires.
SKU: D403,B73
Reviews
There are no reviews yet