- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
Arduino Sensor And Modules
Compare
5v Dc 8 Channel Relay Module For Arduino In Pakistan
This product is an 8-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V dc.
₨800
Features of 5v Dc 8 Channel Relay Module For Arduino:
- Imported high quality double-sided compact PCB.
- Opto-Isolated inputs mean your digital electronics are safe and noise-free.
- This relay module is 5V active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipment with a large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- The standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
Specifications of 5v Dc 8 Channel Relay Module Board For Arduino
- Working voltage: 5V
- Channel: 8 channel
- Item size: approx. 75mm (L) x 55mm (W) x 20mm (H)
- Item weight: 56g (approx)
Package Includes:
- 1 x Opto-isolated 5v Dc 8 Channel Relay Module Board For Arduino
Add a review
You must be logged in to post a review
Log In
Related products
- Arduino Sensor And Modules
ECG Electrodes with Metal Snap and Low Impedance Solid Medical Conductive Gel In Pakistan
Quick View
Arduino Sensor And ModulesECG Electrodes with Metal Snap and Low Impedance Solid Medical Conductive Gel In Pakistan
ECG Electrodes with Metal Snap and Low Impedance Solid Medical Conductive Gel Disposable ECG electrodes are used for diagnostic ECG or ECG monitoring They can be used for various ECG tests Chunfeng and reg; Disposable ECG electrodes use an AG/AgClsensor element and solid conductive and adhesive Hydro-gel for adhesion The AG/AgCl sensor element has the best sensitivities and the solid conductive and adhesive hydro-gel has very low impedance and is non-irritating, non-sensitizing and non-cytotoxic to the skin All electrodes are latex-free.
SKU: D41,B104 - Arduino Sensor And Modules
DFPLAYER MINI MP3 PLAYER MODULE FOR ARDUINO UNO MUSIC AUDIO VOICE BOARD
Quick ViewArduino Sensor And ModulesDFPLAYER MINI MP3 PLAYER MODULE FOR ARDUINO UNO MUSIC AUDIO VOICE BOARD
DFPlayer Mini MP3 Player Module is suitable for Arduino UNO Music Audio Voice Board.DFPlayer Mini is a compact and inexpensive MP3 module that can be connected directly to the speaker. Module with battery, speaker, the keyboard can be used alone, or through serial port control, such as the Arduino UNO or any microcontroller with a serial port module. The module itself seamlessly integrated MP3, WAV, WMA hardware decoding. While the software supports TF card drivers to support FAT16, FAT32 file systems. It can be done through simple serial commands specified music player, as well as how to play music and other functions, without the heavy
the underlying operation, easy to use, stable, and reliable.SKU: D59 - Arduino Sensor And Modules
MQ7 CO Carbon Monoxide Coal Gas Sensor Module In Pakistan
MQ7 MQ 7 MQ-7 CO Carbon Monoxide Coal Gas Sensor Module For Arduino detects the concentrations of CO in the air and outputs its reading as an analog voltage. The sensor can measure concentrations of 10 to 10,000 ppm. The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5 V.This module provides both digital and analog outputs. The threshold level for digital output can be easily adjusted using the preset on the board. The MQ-7 sensor module can be easily interfaced with microcontrollers, Arduino, etc.
SKU: D52,B105 - Arduino Sensor And Modules
MQ135 Air Quality Detector Sensor Module in Pakistan
The MQ135 MQ-135 MQ 135 Air Quality Detector Sensor Module For Arduino has lower conductivity in clean air. When the target combustible gas exists, the conductivity of the sensor is higher along with the gas concentration rising. Convert change of conductivity to the corresponding output signal of gas concentration. The MQ135 MQ-135 MQ 135 gas sensor has a high sensitivity to Ammonia, Sulphide and Benzene steam, also sensitive to smoke and other harmful gases. It is at low cost and suitable for different applications such as harmful gases/smoke detection.
SKU: D49,B105 - Arduino Sensor And Modules
Fingerprint Scanner GT-511C3 Bio-Metric Sensor Module In Pakistan
Quick ViewArduino Sensor And ModulesFingerprint Scanner GT-511C3 Bio-Metric Sensor Module In Pakistan
The GT511C3 GT-511C3 GT 511C3 FPS (fingerprint scanner) is a small embedded module that consists of an optical sensor mounted on a small circuit board. The optical sensor scans a fingerprint and the microcontroller and software provide the functionality of the module which automatically processes the scanned fingerprint. The GT511C3 GT-511C3 GT 511C3 Optical Fingerprint Scanner Module with JST SH Connector is a high-performance fingerprint scanner. This optical sensor module is designed for easy integration into applications with a serial interface (UART). The GT-511C3 is a TTL fingerprint scanner and can be accessed by Raspberry Pi, Arduino, or any other Microcontroller using just two wires viz Tx & Rx.GT-511C3 Fingerprint Scanner module has an onboard optical sensor and a 32-bit CPU. It does most of the heavy work like reading and identifying fingerprints. A simple set of commands has to be sent from your micro-controller and the GT-511C3 fingerprint scanner does the rest of the work. To get started, just register each fingerprint that you want to store by sending the corresponding command and pressing your finger against the reader three times. The fingerprint scanner can store different fingerprints and the database of prints can even be downloaded from the unit and distributed to other modules. As well as the fingerprint “template,” the analyzed version of the print, you can also retrieve the image of a fingerprint and even pull raw images from the optical sensor. We need two wires are for TX and RX and two wires for the power supply (5V). The module can be used in projects for identifying users, for example allowing access through a door by scanning a finger instead of using a key.
SKU: D46
Reviews
There are no reviews yet