- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
74LS And 74HC Series IC
Compare
74LS32 74-LS32 74HC32 7432 Quad 2 Input OR Gate DIP IC SN74CH32N in Pakistan
This device contains four independent gates each of which performs the logic OR function. The 74LS32 is a 14-Pin Quad 2-Input OR Gate IC. The 74LS32 provides four independent 2-input OR gates with standard push-pull outputs. Featured by Sharvi Electronics The device is designed for operation with a power supply range of 2.0V to 6.0V. Inputs include clamp diodes. This enables the use of current-limiting resistors to interface inputs to voltages in excess of VCC.
₨90
This device contains four independent gates each of which performs the logic OR function. The 74LS32 is a 14 Pin Quad 2-Input OR Gate IC. The 74LS32 provides four independent 2-input OR gates with standard push-pull outputs. Featured by Sharvi Electronics The device is designed for operation with a power supply range of 2.0V to 6.0V. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Specifications:
- Voltage Rating: 2.0 to 6.0V
- Temperature Rating: 0 to 70ºC
- Outputs Directly Interface to CMOS, NMOS, and TTL
- Large Operating Voltage Range
- Wide Operating Conditions
- CMOS low power consumption
- Schmitt Trigger Action at All Inputs
- Number of: 14 Pins
- Mounting: Through Hole
Package Includes:
- 1 x 74LS32 74-LS32 74HC32 7432 Quad 2 Input OR Gate DIP IC in Pakistan
Add a review
You must be logged in to post a review
Log In
Related products
- 74LS And 74HC Series IC
IC 74LS85 4 Bit Magnitude Comparator DIP 16 in Pakistan
74HC85 4-Bit Comparator IC (7485 IC) DIP-16 Package. 74LS85 is the four-bit magnitude comparators that perform a comparison of straight binary and straight BCD (8-4-2-1) codes. Three fully decoded decisions about two 4-bit words (A, B) are made and are externally available at three outputs. These devices are fully expandable to any number of bits without external gates.
SKU: D2017 - 74LS And 74HC Series IC
SMD 74HC595 74HC595D SOP16 Patch 8 Bit Serial Shift Register in Pakistan
Quick View
74LS And 74HC Series ICSMD 74HC595 74HC595D SOP16 Patch 8 Bit Serial Shift Register in Pakistan
74HC595 8-bit Serial-to-Parallel Shift Register is a high-speed shift register that utilizes advanced silicon-gate CMOS technology. This device possesses the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads.
This device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has 8 3-STATE outputs. Separate clocks are provided for both the shift register and the storage register.
The shift register has direct-overriding clear, serial input, and serial output (standard) pins for cascading. Both the shift register and storage register use positive-edge triggered clocks. If both clocks are connected together, the shift register state will always be one clock pulse ahead of the storage register.
The 74HC logic family is speed, function, and pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
SKU: D2013 - 74LS And 74HC Series IC
74193 Synchronous 4 Bit Binary Counter DIP IC SN74LS193N 74HC193 in Pakistan
Quick View
74LS And 74HC Series IC74193 Synchronous 4 Bit Binary Counter DIP IC SN74LS193N 74HC193 in Pakistan
This circuit is a synchronous up/down 4-bit binary counter. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change together when so instructed by the steering logic. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple clock) counters. The outputs of the four master-slave flip-flops are triggered by a low-to-high level transition of either count (clock) input. The direction of counting is determined by which count input is pulsed while the other count input is held high. The counter is fully programmable; that is, each output may be preset to either level by entering the desired data at the inputs while the load input is low. The output will change independently of the count pulses.
SKU: D2015
Reviews
There are no reviews yet