- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
₨116
74LS109 IC in Pakistan
Features and Specifications 74LS109 IC in Pakistan:
Here are some important features and specifications of the 74LS109 IC.
- Positive Triggering edge
- Operating Voltage: 4.75V – 5.25V DC
- The frequency at a normal voltage (Max): 35MHz
- Propagation delay (Max): 20ns
- High Output Current: 8 mA
- Low Output Current: 0.4 mA
Packing list:
- 1x 74LS109 IC in Pakistan
Related products
- 74LS And 74HC Series IC
74LS283 in Pakistan
0 out of 5(0)These full adders perform the addition of two 4-bit binary
numbers. The sum (R) outputs are provided for each bit and
the resultant carry (C4) is obtained from the fourth bit.
These adders feature a full internal look ahead across all four
bits. This provides the system designer with a partial lookahead
performance at the economy and reduced package
count of a ripple-carry implementation.SKU: D2018 - 74LS And 74HC Series IC
74238 SN74HC238N 74HC238 74LS238 DIP 16 Pin IC in Pakistan
0 out of 5(0)These are high-speed silicon-gate CMOS decoders well suited to memory address decoding or data-routing applications. Both circuits feature low power consumption usually associated with CMOS circuitry, yet have speeds comparable to low-power Schottky TTL logic. Both circuits have three binary select inputs (A0, A1, and A2). If the device is enabled, these inputs determine which one of the eight normally high outputs of the HC/HCT138 series goes low or which of the normally low outputs of the HC/HCT238 series go high. Two active low and one active high enables (E1, E2, and E3)are provided to ease the cascading of decoders. The decoder’s eight outputs can drive ten low-power Schottky TTL equivalent loads.
SKU: D2021 - 74LS And 74HC Series IC
74151 ic in Pakistan
0 out of 5(0)This Data Selector/Multiplexer contains full on-chip decoding to select one-of-eight data sources as a result of a unique three-bit binary code at the Select inputs. Two complementary outputs provide both inverting and non-inverting buffer operation. A Strobe input is provided which, when at the high level, disables all data inputs and forces the Y output to the low state and the W output to the high state. The Select input buffers incorporate internal overlap features to ensure that select input changes do not cause invalid output transients. RoboticsBD
SKU: D2022 - 74LS And 74HC Series IC
7447 74HC47 74LS47 BCD to 7 Segment Decoder Driver DIP 16 in Pakistan
Quick View74LS And 74HC Series IC7447 74HC47 74LS47 BCD to 7 Segment Decoder Driver DIP 16 in Pakistan
0 out of 5(0)74LS47 accepts four lines of BCD (8421) input data, generates their complements internally and decodes the data with seven AND/OR gates having open-collector outputs to drive indicator segments directly. Each segment output is guaranteed to sink 24 mA in the ON (LOW) state and withstand 15V in the OFF (HIGH) state with a maximum leakage current of 250 µA. Auxiliary inputs provided blanking, 74LS47 BCD to 7-Segment Decoder/Driver IC.
SKU: D2008
Reviews
There are no reviews yet