Thermoelectric Peltier Accessories
Showing 26–33 of 33 results
- Peltier Module
TEC1-12710 12V Dc 10A Thermoelectric Cooler Peltier Module In Pakistan
DAROGHAWALA.ORG is an online electronics store. The TEC1-12710 40x40mm Thermoelectric Cooler 10A Peltier Module is the simple application of the Peltier Thermoelectric Effect. The Thermoelectric cooling module features 127 semiconductor couples in the area of 40mmx40mm. Thermoelectric coolers also are known as TEC or Peltier Module create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity.
This 12V Peltier Module works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or another water block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it.
SKU: D28,B22 - Peltier Module
TEC1-12715 12V Dc 15A Thermoelectric Cooler Peltier Module In Pakistan
The TEC1-12715 12715 40x40mm Thermoelectric Cooler 15A Peltier Module is the simple application of the Peltier Thermoelectric Effect. A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity. This Heat Sink Thermoelectric Cooler Peltier works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or another water block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on
SKU: D29,B22 - Heatsink & Heatsink Paste
Thermal Compound Grease Gel Heat Sink Paste In Pakistan
Thermal Heat sink paste is also called thermal grease. This thermal heat paste is a kind of thermally conductive but it is an electrically insulating compound. This high-temperature heat sink compound paste used as an interface between the heat sink and heat sources. This best CPU heatsink paste is used in high-power semiconductor devices. this thermal grease paste is specially used to eliminate air gaps or spaces. This heatsink gel acts as a thermal insulator from the interface area so as to maximize heat transfer. This thermal paste is an example of thermal interface material.
SKU: D37,B24 - Water Pump
YF-S201 Arduino Water Flow Sensor Water Measurement Sensor in Pakistan
This YF-S201 sensor sits in line with your water line and contains a pinwheel sensor to measure how much liquid has moved through it. There’s an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry. The sensor comes with three wires: red (5-24VDC power), black (ground), and yellow (Hall effect pulse output). By counting the pulses from the output of the sensor, you can easily calculate water flow. Each pulse is approximately 2.25 milliliters. Note this isn’t a precision sensor, and the pulse rate does vary a bit depending on the flow rate, fluid pressure, and sensor orientation. It will need careful calibration if better than 10% precision is required. However, YF-S201 is great for basic measurement tasks! We have an example Arduino sketch that can be used to quickly test the sensor, it will calculate the approximate flow of water in liters/hour. The pulse signal is a simple square wave so its quite easy to log and convert into liters per minute using the following formula. Pulse frequency (Hz) / 7.5 = flow rate in L/min.
SKU: D2495
