- Raspberry Pi & Accessories
- Raspberry Pi Kits
- Raspberry Pi Board
- Raspberry Pi Case
- Raspberry Pi Came
- Raspberry Pi Accessories
Arduino Sensor And Modules
Showing 221–240 of 244 results
- Arduino Sensor And Modules
SW-420 Vibration Sensor Module For Arduino In Pakistan
SW 420 Vibration sensor module alarm Motion sensor module vibration switch SW-420 module based on the vibration sensor SW420 and Comparator LM393 to detect if there is any vibration beyond the threshold. The threshold can adjust using an onboard potentiometer. When this no vibration, this module output logic LOW the signal indicates LED light, and vice versa.
SKU: D193,SB47 - Arduino Sensor And Modules
SW520D Angle Sensor Module Ball Switch Tilt Sensor Module For Arduino In Pakistan
Quick View
Arduino Sensor And ModulesSW520D Angle Sensor Module Ball Switch Tilt Sensor Module For Arduino In Pakistan
The tilt sensor module comes with the basic components for operation. Supplying power and it is good to be used. Attach it to an object and it will detect whether the object is tilted. Simple usage as it is a digital output, so you will know the object is tilted or not by reading the output. It uses SW-460D or SW-520D tilt sensor. The tilt sensor is ball rolling type, NOT Mercury type.
SKU: D195,SB101 - Stepper Motor
TB6600 Stepper Motor Driver Control Board Module In Pakistan
TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 Arduino stepper motor driver has a wide range of power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for most stepper motors. The stepper driver supports speed and direction control. You can set its micro-step and output current with 6 DIP switches. There are 7 kinds of micro-steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing their anti-high-frequency interference ability. As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.
SKU: D398 - Arduino Sensor And Modules
TCRT5000 IR Line Tracking Line Following Sensor Module For Arduino In Pakistan
Quick ViewArduino Sensor And ModulesTCRT5000 IR Line Tracking Line Following Sensor Module For Arduino In Pakistan
The TCRT5000 and TCRT5000L are reflective sensors that include an infrared emitter and phototransistor in a leaded package that blocks visible light. The package includes two mounting clips. TCRT5000L is the long lead version.
SKU: D197,SB95 - Servo Motor
Tower Pro MG996R MG996 Metal Gear Servo Motor In Pakistan
TowerPro Servo Motors are optimum-quality and affordable cost servos.! They are suitable for a wide range of applications, including RC aircraft, automobiles, and robotics, Or just to have some fun with whatever crazy project you’re working on.
SKU: D1265 - Arduino Sensor And Modules
TTP229 16 Way Capacitive Touch keypad Module in Pakistan
This is TTP229 16-Way Capacitive Touch Switch Digital Touch Sensor Keypad Module. This capacitive touch sensor module uses the TTP229 integrated circuit, making it easy to add capacitive touch input to your project.
SKU: D2592 - Stepper Motor
ULN2003 Stepper Motor Driver Board Module In Pakistan
This is the ULN2003 Driver Module Stepper Motor Driver Board for driving and controlling stepper motors. ULN2003 Stepper Motor Driver Board uses the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motor (5v-12v). It’s easy to use Arduino or another development platform to drive the stepper motor by this diver board. The 5 Line 4 Phase can be driven by an ordinary ULN2003 chip that can also be connected to the phase 2 development board used for supporting the use of a direct plug and easy-to-use stepper motor used in the development board. A, B, C, D four-phase LED indicates the status of the stepper motor work.
SKU: D396,B73 - Display Controller
USB Port Single Double Color LED Display Controller Card HD-U6A in Pakistan
Quick ViewDisplay ControllerUSB Port Single Double Color LED Display Controller Card HD-U6A in Pakistan
This LED Display Controller Card HD-U6A is for signage, store, outdoor advertising, and other information display. HUIDU technology launched a U-disk series control card. This color light LED controller updated the display programs by the USB port. HD-U6A LED control card is U-disk series control card, through the USB port to update the program. This Huidu LED signs controller board is cost-effective, simple software to operate, better and rich display effects, supporting a variety of monochrome displays.
SKU: D637 - Arduino Sensor And Modules
USB To TTL CH340G Serial Converter For Arduino In Pakistan
This is CH340G USB To TTL(Serial) Converter, USB to TTL / USB-TTL /STC microcontroller programmer / PL2303 in nine upgrades plate with a transparent cover Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc. This USB–TTL converter is based on CH340G USB to Serial TTL converter chip. The module can be used for 3.3V logic level signals and has the option to switch from 5V to 3.3V logic level using a 2 pin shunt supplied with the module.
SKU: D367,SB91 - Arduino Sensor And Modules
Voice Recognition Module With Microphone Control Voice Board For Arduino in Pakistan
Quick ViewArduino Sensor And ModulesVoice Recognition Module With Microphone Control Voice Board For Arduino in Pakistan
This Voice Recognition Module, which can recognize as many as 15 voice instructions and be suitable for most cases involving voice control. It receives configuration commands or responds through a serial port interface. With this module, we can control cars or other electrical devices by voice. It can store 15 pieces of voice instruction. Those 15 pieces are divided into 3 groups, with 5 in one group. First, we should record the voice instructions group by group. After that, we should import one group by serial command before it could recognize the 5 voice instructions within that group. If we need to implement instructions in other groups, we should import the group first. This module is speaker-independent. If your friend speaks the voice instruction instead of you, it may not identify the instruction.
SKU: D62 - Arduino Sensor And Modules
Water Level Depth Detection Sensor For Arduino In Pakistan
The Water Level Depth Detection Sensor for Arduino has an Operating voltage DC3-5V and an Operating current of less than 20mA. The Sensor is the Analog type that produces analog output signals according to the water pressure with its Detection Area of 40x16mm. The Water Level Sensor is an easy-to-use and cost-effective with high level/drop recognition sensor by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level. Easy to complete water to analog signal conversion and output analog values can be directly read Arduino development board to achieve the level alarm effect.
SKU: D392,SB83 - Arduino Sensor And Modules
WTV020SD-16P music module Mp3 Module For Arduino in Pakistan
The WTV020SD is a small, simple IC for embedding audio playback into your next project. These devices are commonly used in children’s toys and talking retail displays. This breakout board allows you to access the functionality of the WTV020SD to give a voice to your next project. The breakout board includes a battery connector and a micro-SD card slot. Simply load your audio files onto a micro-SD card and plug it in, power up the module, and trigger the playback. Playback can be triggered in either key or serial mode: The key-mode provides a stand-alone operation where a host micro is not required. With only 3 push buttons, a 3V battery, and a speaker, an extremely compact and low component count MP3-Player-like system can be implemented. The serial mode provides a simple, 2-wire interface to any micro-controller via its DATA and CLK lines. Audio operations such as PLAY, PAUSE, STOP, and VOLUME control functions are all available to the host micro via simple serial commands. The audio compression used in this module is a little strange (4-bit ADPCM @ 6-32kHz) so you’ll need to download the utility in the documents below in order to convert yours. WAV files into the 4-bit ADPCM format required.
SKU: D60
