Nokia 5110 Monochrome Display Screen in Pakistan

The name NOKIA5110 itself is enough to explain its origin. daroghawala.org Yes of course !!! this LCD module was used in old Nokia 5110 and 3310 cell phones. Now it is been widely used by hobbyists for graphics, text, etc. Though it’s an industrial module, this LCD display is extremely easy to use. daroghawala.org The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended as a cell phone screen.

Features :

1. 84 X 48 dot matrix LCD, can show 4 lines of characters.
2. Using a serial interface to communicate with the master processor, the number of interface signal lines was reduced greatly, to only 8 signal lines including power and GND.
3. Support different types of MCU, such as the Arduino, AVR, SPI, MCS51, and so on.
4. Transfer rate up to 4Mbps can full-speed write display data without waiting time.
5. Can use the conductive glue to connect the module to the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy to install and replace.
6. LCD controller or driver chip has been bound to the LCD chip, and the volume of the LCD is small.
7. Low power supply, the working current in a normal situation is lower than 200µA and has the power-down mode.
8. LIGHT linked with GND, the backlight to be lit.
9. Need you to compress the screen and PCB tighter, might be got loose after the delivery.
10. Use a 3.3V controller, otherwise, the display could be quite vague.

Package Includes :

• 1 x Nokia 5110 LCD Display.