IBT2 BTS7960 43A H Bridge Motor Driver Module In Pakistan

The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module is; a fully integrated high current H bridge for motor drive applications using the BTS7960 high current half-bridge. the BTS7960 is part of the NovalithICTM family. This contains one p-channel high side MOSFET and one n-channel low side MOSFET; with an integrated driver IC in one package. Due to the p-channel high side switch; the need for a charge pump is eliminated thus minimizing EMI.

Specification of IBT2 BTS7960 43A H Bridge Motor Driver Module For Arduino:

• Model:IBT2 BTS7960
• Input voltage(V):6 – 27
• Maximum current(A):43
• Input level(V):3.3 – 5
• Duty cycle:0 – 100%
• Path resistance:16 mΩ at 25°C.
• Low quiescent current:7 µA at 25°C
• Operating Frequency(KHz):25
• Dimensions (mm):50 x 50 x 43
• Weight(gm):67

Feature of Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module:

1. PWM capability of up to 25 kHz combined with active freewheeling.
2. Switched-mode current limitation for reduced power dissipation in overcurrent.
3. Status flag diagnosis with current sense capability.
4. Overtemperature shut down with latch behavior.
5. Overvoltage lockout.
6. Undervoltage shut down.
7. Driver circuit with logic level inputs.
8. Adjustable slew rates for optimized EMI.
9. 74AHC244 Schmitt-trigger Octal buffer/line driver for ESD protection (Inputs accepts voltages higher than VCC).

Input port:

1. RPWM: forward level or PWM signal input, active high.
2. PWM: Reverse level or PWM signal input, active high.
3. R_EN: forward drive enable input, high-level enable, low level off.
4. L_EN: Reverse drive enable input, high-level enable, low level off.
5. R_IS: forward drive current alarm output.
6. L_IS: Reverse drive current alarm output.
7. VCC: +5 V power output, 5V power supply connection with the microcontroller.
8. GND: signal common low end.

Package Include:

• 1 x IBT2 BTS7960 43A H Bridge Motor Driver Module In Pakistan