Temperature and Humidity Sensor Module
Showing all 10 results
-
Temperature and Humidity Sensor Module
DHT22 AM2302 Temperature And Humidity Sensor In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleDHT22 AM2302 Temperature And Humidity Sensor In Pakistan
AM2302 output calibrated digital signal. It applies exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Its sensing elements are connected to an 8-bit single-chip computer. Every sensor of this model is temperature compensated and calibrated in an accurate calibration chamber and the calibration coefficient is saved in the type of program in OTP memory when the sensor is detected, it will cite the coefficient from memory.
SKU: D1206 -
Temperature and Humidity Sensor Module
DHT22 Digital Temperature and Humidity Sensor Module AM2302 In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleDHT22 Digital Temperature and Humidity Sensor Module AM2302 In Pakistan
If you are wondering to build a device that detects temperature and humidity from the atmosphere, then This sensor is needed for you. you can Purchase this sensor from DAROGHAWALA.ORG at a reasonable price. The DHT22 Digital Temperature and Humidity Sensor Module AM2302 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins are needed). It’s fairly simple to use but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.
SKU: D1155 -
Temperature and Humidity Sensor Module
DS18B20 18B20 Temperature Sensor In Pakistan
This is the latest Digital Temperature Sensor DS18B20 from Maxim IC (but sourced from Sparkfun). The DS18B20 sensor measures temperature in degrees Celsius with 9 to 12-bit precision, -55C to 125C (+/-0.5C). Each temp sensor has a unique 64-bit serial number programmed into it which allows for a huge number of sensors to be used on one data bus. The best Arduino temperature sensor is a wonderful part that is the cornerstone of many data-logging and temperature control projects.
SKU: D1152 -
Temperature and Humidity Sensor Module
DS18B20 Waterproof Temperature Sensor Digital Temperature Probe In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleDS18B20 Waterproof Temperature Sensor Digital Temperature Probe In Pakistan
This is the DS18B20 Water Proof Temperature Probe which is based on the DS18B20 sensor. It is very handy when you need to measure something far away, or in wet conditions. Because they are digital, you don’t get any signal degradation even over long distances. These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems. When using with a microcontroller put a 4.7k resistor to the sensing pin, which is required as a pull-up from the DATA to VCC line.
SKU: D1151 -
Temperature and Humidity Sensor Module
KY 001 KY-001 3Pin DS18B20 Temperature Sensor Module In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleKY 001 KY-001 3Pin DS18B20 Temperature Sensor Module In Pakistan
DS18B20 Temperature Sensor Module is a digital temperature sensor, and you can easily connect it to Arduino with only one 4.7-pound resistor, base 1 – Ground 2 – Output – Base 3 to the positive of the source, with resistance to base 2 Is connected. The connection of this sensor to the Arduino via the 1-wire protocol is established. Therefore, several sensors can be connected only through one common wire to Arduino. The output is digitally accurate to 12 bits. Therefore, the temperature can be measured with a precision of 0.0625 º C.
SKU: D1153 -
Temperature and Humidity Sensor Module
KY 013 KY-013 Analog Temperature Sensor Module For Arduino In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleKY 013 KY-013 Analog Temperature Sensor Module For Arduino In Pakistan
The KY-013 Analog Temperature Sensor module consists of an NTC thermistor and a 10 kΩ resistor. The resistance of the thermistor varies with the surrounding temperature, we’ll use the Steinhart–Hart equation to derive the precise temperature of the thermistor.
SKU: D163,SB54 -
Temperature and Humidity Sensor Module
KY 015 KY-015 DHT-11 DHT11 Digital Temperature And Relative Humidity Sensor Module for Arduino In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleKY 015 KY-015 DHT-11 DHT11 Digital Temperature And Relative Humidity Sensor Module for Arduino In Pakistan
KY015 Ky 015 KY-015 Arduino DHT11 DHT 11 DHT-11 temperature and humidity sensor module provide a digital serial interface to measure humidity and temperature.
SKU: D176,SB102 -
Temperature and Humidity Sensor Module
KY 028 KY-028 Digital Thermistor Temperature Sensor Module For Arduino In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleKY 028 KY-028 Digital Thermistor Temperature Sensor Module For Arduino In Pakistan
Digital Temperature Sensor KY-028 for Arduino, measures temperature changes based on the thermistor resistance. This module has both digital and analog outputs, there’s a potentiometer to adjusts the detection threshold on the digital interface.
SKU: D167,SB54 -
Temperature and Humidity Sensor Module
LM35 Temperature Sensors In Pakistan
LM35 is an integrated analog temperature sensor whose electrical output is proportional to Degree Centigrade. LM35 Sensor does not require any external calibration or trimming to provide typical accuracies. The LM35’s low output impedance, a linear output, and precise inherent calibration make interfacing to readout or control circuitry especially easy. As such no extra components are required to interface LM35 to ADC as the output of LM35 is linear with a 10mv/degree scale. It can be directly interfaced to any 10 or 12-bit ADC.
SKU: D1154 -
Temperature and Humidity Sensor Module
MLX90614 GY-906 Digital Infrared Temperature Sensor Module In Pakistan
Quick ViewTemperature and Humidity Sensor ModuleMLX90614 GY-906 Digital Infrared Temperature Sensor Module In Pakistan
If You are wandering to Build a Device That is used to measure the temperature of a hot object like machines, flames, hot iron, or device CPU. Then this Sensor is Needed for you. The MLX90614 ESF is an Infra-Red thermometer for non-contact temperature measurements. Both the IR-sensitive thermopile detector chip and the signal conditioning ASIC are integrated into the same TO-39 can. The Integrated MLX90614 GY-906 is a low noise amplifier, 17-bit ADC, and powerful DSP unit thus achieving high accuracy and resolution of the thermometer.
SKU: D1156